Does Kodiak Disc Brake Kit K2R526S Come With Brake Pads
Updated 07/20/2015 | Published 07/17/2015 >
Products Featured in This Question
Question:
do these come with pads or do I have to purchase these by them ? What are best hubs to use with these?
asked by: Lance
Expert Reply:
The Kodiak Disc Brake Kit # K2R526S does come with brake pads. When it is time to replace those brake pads, you will want part # K225CP. The disc brake kit will fit wheels 15 inches and up, with axles rated 5,200 to 6,000 pounds.
The rotor will fit over 6 on 5-1/2 inch, standard idler hubs that are held in place by the wheel and then use lug nuts. As long as you have a standard hub, it is not necessary to replace your hub to use these disc brakes.
If you are looking to replace your hubs, for marine application, galvanized hubs would work best. We can recommend hubs for you if you let us know your inner bearing, outer bearing, and grease seal part numbers from your existing hubs.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Rotor
- 5200 lbs Axle
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel
- Shop: DeeMaxx Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 6,000 lbs
- Shop: Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs
- Shop: DeeMaxx Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Maxx Coating and Stainless Steel - 6,000 lbs
- Video: Feature Review 4-Leaf Double-Eye Spring for 2,800-lb Trailer Axles
- Video: All About the Kodiak 12" Rotor
- Q&A: Comparing Maxx and Stainless Steel DeeMaxx Disc Brake Kits
- Article: Brake Controller Installation: Starting from Scratch
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Wiring Diagrams
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Disc
- Shop: Shackle Bolt with Locknut For Double-Eye Springs - 1/2" Diameter - 3" Long
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Video: Titan Master Cylinder Assembly Installation
- Video: Titan Brake Actuator T2374600 Review
- Q&A: Troubleshooting Titan Model 10 Actuator That Locks Up Drums Brakes
- Q&A: Replacement Master Cylinder for Titan Model 10 Actuator on 1999 Prestige Trailer
- Q&A: Will Kodiak Stainless Steel Disc Brake Kit Fit on 2015 EZ Loader Trailer with UFP Brakes
- Q&A: Replacement Brake Kit For Deemax 12 Disc Brake Kit Severe Corrosion
- Q&A: What Caliper and Brake Pads do I Need to Replace My TDE Caliper 4690?
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Article: The Best Boat Bumpers
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Hard Tonneau Covers vs Soft Tonneau Covers

