Replacement Seal for Part 17146

Question

Question:

I have got the numbers from 2 seals on my travel trailer and I need to get new ones the first is TCS PO6887 and the other is 17146 do these cross reference to any of your numbers? thanks

asked by: Alec

0

Expert Reply:

The replacement seal for 17146 is Grease Seal - Double Lip, part # 58846. This is a single lip grease seal with an inner diameter of 1.719 inches and an outer diameter of 2.565 inches that is intended for 3500-lb axles. It is sold as single units.

I was unable to find a cross reference for TCS PO6887.

expert reply by: Chris O

0

Mike

5/16/2020

for future reference -- specs are : TCS P06887 --TB 1.719 / 2.561 / 0.500

Answer 1

The 171255UC seal is the same as the Dexter 010-11088/K71-G01-80. We have that same seal available as the Grease Seal Kit- Triple Lip - Inner Diameter 1.719" - Outer Diameter: 2.565" - Qty 2 #DX49CR.

view full answer...

Answer 2

Hi Thomas; it looks like the old 568861 has an inner diameter of 1.719" and outer diameter of 2.565". I recommend measuring yours just to be sure. Assuming that is correct, you can use the #RG06-050 which is a pair of seals that share the…

view full answer...

Answer 3

I sure can Blake! I just heard back from Dexter and both of your axles are 3,500 lbs capacity. That's all the information they were able to provide. Here are the replacement parts you've requested: Hub/Drums - 5 on 4-1/2 Lug Nut Pattern item…

view full answer...

Answer 4

Hey Ron, the correct grease seal for a 3,500 lb trailer axle would be the part #58846. Are you repacking your bearings?

view full answer...

Answer 5

Hello again Jim, Thanks for writing in! You're looking at the correct seal. The GS-1719 DL and TRP markings are the important identifiers, and they match the Double Lip Grease Seal #58846 (or for 2 pack #RG06-050). The additional numbers, such as…

view full answer...

Answer 6

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

view full answer...

Answer 7

Hi Bill! The snap ring style bearing setups have been phased out, so there is not a kit with that replacement included, but we do have Replacement Outer Snap Ring for 35mm, 42mm, and 50mm Dexter Nev-R-Lube Bearings #69-96 which is confirmed for axles…

view full answer...

Answer 8

Hey James! You can use the Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR with your Coleman Mach 10. It will work with your newer 35000 series in addition to the other ones listed on the product page. What kind of trailer do you have and…

view full answer...

Answer 9

Welcome back Mark! The MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K #MR87ZR would be a great upgrade from a standard equalizer. This will be slightly taller and wider, but it's the one I recommend. For the…

view full answer...

Answer 10

The Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part #BK2-100 or just the Grease Seal part #RG06-050.

view full answer...

Answer 11

Thanks for providing all of the information for your axle. This axle is going to use the standard 3,500 lb axle bearing sizing. You can use the Bearing Kit #BK2-100, which will come with bearings, races, seals, cotter pin and tang washer - everything…

view full answer...

Replacement Seal for Part 17146

Product Page this Question was Asked From

Continue Researching