Recommended Trailer Hitch And Wiring For 2016 Acura RDX

Question

Question:

Can you confirm the Curt trailer hitch number C13130 will fit the 2016 Acura RDX

asked by: Tom

0

Expert Reply:

Yes, the Curt # C13130 does fit your 2016 Acura RDX. To tow a traier you also need a ball mount and hitch balls. I've linked our selection of ball mounts as well as an article to help you select the correct rise or drop you need.

If you need trailer wiring, you will need part # 118569. I have attached a link to an installation video for this harness.

I have attached links to some of the products we offer that may work for you. If you have any questions about a specific item let me know and I can make some recommendations.

expert reply by: Jeffrey L

0

Answer 1

Between the Curt #C13130 and the Draw-Tite #75784 2-inch Class III hitches I recommend the Draw-Tite since it does not require you to use a support strap #18050 as the Curt does, and since its 400-lb tongue weight rating is more than adequate for any…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver, part #C13130, is a fit for your Acura RDX. The hitch has a 2 inch by 2 inch receiver opening and has a tongue capacity of 600 lbs. Please note that this hitch has a gross trailer weight maximum of 4000 lbs and and a…

view full answer...

Answer 3

The Curt Class III hitch that has been confirmed as a fit for your 2013 Acura RDX is the part #C13130 that you referenced. The capacities for the hitch are 4,000 lbs total trailer weight and 600 lbs total tongue weight. You should note that in a…

view full answer...

Answer 4

Some manufacturers are more conservative in their approach to safety and will therefore insist that extra measures are taken when using their products. We do offer a few hitches that are designed to fit your 2014 Acura RDX. I recommend the Draw-Tite…

view full answer...

Answer 5

The Curt Trailer Hitch #C13130 is an excellent option for towing a tear drop trailer behind your 2016 Acura RDX! This features a hidden crosstube so it looks very slick, and the 600 lbs tongue/4,000 lbs towing weight capacities are well over the 150…

view full answer...

Answer 6

Yes, the Curt Trailer Hitch #C13130 does fit your 2014 Acura RDX. This hitch is capable of supporting a maximum GTW of 4,000lbs, and a maximum TW of 600lbs. If you're interested in a ball mount kit, I recommend the #C45036. This kit includes a…

view full answer...

Answer 7

We have a very similar Curt hitch that does fit your 2017 Acura MDX with the part #C13146 but the one you referenced is not a fit so it would not be the hitch to go with. I attached an install video for this hitch for you to check out as well.

view full answer...

Answer 8

All of the Class III hitches we carry for the 2015 Acura RDX will be pretty low profile. Basically all you would see is the hitch opening right underneath you rear bumper. The most popular option we carry is the Curt hitch part #C13130. This hitch…

view full answer...

Answer 9

We do have trailer hitches and wiring that will fit your 2016 Acura RDX. For a trailer hitch I recommend a Class III hitch because they are more robust and have a 2 inch receiver that is compatible with more accessories. Curt Class III hitch #C13130…

view full answer...

Answer 10

Let's start with the trailer hitch for your 2015 Acura RDX. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C13130. It has a maximum tongue weight of 600 lbs and a maximum gross trailer weight of 6,000 lbs.…

view full answer...

Answer 11

Yes, the etrailer Hitch item #e24AR has an similar if not the same installation method as the Curt Trailer Hitch item #C12083. This hitch is confirmed to fit your 2015 Acura RDX. I have linked an installation video below for the Curt Trailer Hitch…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...