Need Bearing Kit for Trailer with L44649 Bearings and Seal 46750

Updated 06/05/2015 | Published 06/04/2015

Products Featured in This Question

Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles

(3452)

$16.27

Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1

(672)

$6.06

Double Lip Grease Seals (pair)

(672)

$7.07

Question:

The boat trailer in question is as old as me or older..so no year, make, model available. Inner and outer bearing numbers match with the kit, but my seal number is: 46750. Will the seal provided be the same as the one I removed? Also, when I removed the castle nut, I did not have a washer behind it, will this kit provide the correct washer? The trailer also has Bearing Buddies or something that is similar. Thank you

asked by: Eric

Expert Reply:

The seal included with bearing kit # BK1-150 is as 10-60 seal. Its inner diameter is 1.5 inches and its outer diameter is 1.987. From what I could find on the seal you have it measures 1.25 inches inner and 1.983 inches outer. So instead of using the seal in the kit you would use # 34823 for one seal or # RG06-010 for a pair.

The kit includes a tang washer with that little piece that sticks up. that piece will get folded down into a gap between two "posts" on the castle nut (instead of using a cotter pin to hold the position).

expert reply by: Michael H