Which Ball Mounts/Accessories Fit Demco Hydraulic Brake Actuator with Adjustable Channel

Updated 06/03/2015 | Published 06/02/2015

Products Featured in This Question

Demco Hydraulic Brake Actuator w/ Manual Lockout - Primed - 8" Adjustable Channel - 8,000 lbs

(33)

$231.49

Curt Channel Mount Forged Pintle and Ball - 13,000 lbs

(87)

$168.77

Demco 2-Tang Clevis - Adjustable Channel Mount - Primed - 10,000 lbs

(3)

$72.60

Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Zinc - 25,000 lbs

(9)

$72.24

Pro Series Mounting Bolts for Adjustable-Channel Couplers

(29)

$25.75

Question:

What ball receivers or couplers will bolt to this?

asked by: Brian

Expert Reply:

The bracket on the end of Demco actuator # DM8759933 is 3 inches wide so you would need to look at accessories that mount to a 3 inch wide or 2-7/8 inch wide opening such as Pro Series coupler # PSA200S0303 or Bulldog coupler # BDA200C0317. These are rated for 8,000 pounds to match the Demco actuator.

I have also included a link to all of the channel mount couplers you could use.

You can also use lunette ring # DM09557-95, 2-tang clevis # DM05593-97, and pintle/ball hitch # C45920 which you normally would not see on the trailer side.

For mounting hardware you can use # PS024202.