Will K-Source Panoramic Mirrors # KSRM1300 & # KSRM1100 Fit 2010 Dodge Journey

Question

Question:

Will KSRM 1300 and/or 1100 fit over the mirror on the 2010 Dodge Journey?

asked by: Longview M

0

Expert Reply:

The two K-Source panoramic aspheric rearview mirrors you referenced, parts # KSRM1300 & # KSRM1100, are both general-fit products not intended for any particular vehicle. They both feature fully adjustable spring-loaded mounting brackets that work fine with a wide range of OEM mirror styles. Both sizes feature an optical blue lens to reduce reflected glare from car lights, mist, etc.

expert reply by: Adam R

0

Answer 1

We do offer replacement mirrors, like CIPA Rearview Mirror #CM33000, but we do not offer the glass as a separate item. Rear view mirrors come in wedge-style and cam-lock styles. (See image) Both use a slide-in fitment for the mirror's base to…

view full answer...

Answer 2

The K-Source Panoramic Mirror, Part #KSRM012, is intended as a universal fit item that will fit a majority of original equipment mirrors. If the rear view mirror of your Acura TL is between 2-1/8 and 2-7/8 inches tall and no thicker than 3/4 of an…

view full answer...

Answer 3

The tallest clip on style of mirror we offer is the K-Source Panoramic Aspheric Rearview Mirror #KSRM1300 which can fit over mirrors that are up to 3-1/2 inches tall. Since that doesn't seem to be tall enough a full mirror replacement like the…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 10

Nice setup Jeff, happy to help! Since you've already ordered the B&W Turnoverball for your 2019 Ram 2500, my recommendation is the B&W Companion Sliding 5th Wheel Hitch #BWRVK3400-5W that's designed for the Turnoverball system.…

view full answer...

Answer 11

Hey Shayne, yes the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND that you referenced would need the included spacers to install in place of a Lippert 1716 pin box as that pin box is 1/2 inch wider. What camper do you have? At this time…

view full answer...

Answer 12

Hey Brian, the Blind Spot Monitoring System for Towable Campers, Travel Trailers, and 5th Wheels Up to 30' Long #CU65XR that you referenced can give you a blind spot monitoring system but its not going to integrate into your vehicle wiring. It is…

view full answer...

Will K-Source Panoramic Mirrors # KSRM1300 & # KSRM1100 Fit 2010 Dodge Journey

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching