Fulton Repair Kit Recommendation for an A-Frame Fulton Coupler

Question

Question:

Can I buy just the latch handle non of the other stuff?

asked by: Josh

0

Expert Reply:

Just the handle of the # F640801 isn't available. The good news is that if you order this repair kit you will have plenty of spare parts left over for your coupler.

This repair kit fits Fulton 44305R and 44314R series couplers.

expert reply by: Jameson C

0

Answer 1

I do have options for you but trailer coupler repair kits are not exactly universal. If I knew the exact trailer coupler you have on your trailer then I could confirm 100% whether or not we have a trailer coupler repair kit for you. However, it looks…

view full answer...

Answer 2

Thanks for the picture of your coupler. It definitely looks like you have a Fulton A-Frame coupler #F44305R0500 so yes the repair kit part #F640801 would be the correct repair kit you'd need.

view full answer...

Answer 3

You would have to make an adapter since a 7-way female to 7-way female adapter isn't made. For wire you would need the part #DW04914-1 (sold by the foot). Then for 7-way connectors you would want the part #PK12703.

view full answer...

Answer 4

No they are not interchangable although they do look similar. The part #F640801 fits coupler part #F44305R0500 and then repair kit part #F670801 fits the part #BD44125W0317. Which coupler does your look like between the two?

view full answer...

Answer 5

We only have two options for a Fulton A-frame coupler repair kit so I will list them for you here. The #F640801 fits the #F44305R0317 and #F44305R0500. The #F670801 fits the 44125W and 44150W series couplers. None of these are actually 14k so unless…

view full answer...

Answer 6

We don't have a confirmed fit for your Fulton Coupler for a repair kit. The Latch Repair Kit #F670801 is the closest option we have and hasn't been tested with straight couplers so I can't confirm it will work. I recommend instead for a…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Fulton Repair Kit Recommendation for an A-Frame Fulton Coupler

Continue Researching