Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K

Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K

Item # 36071

lowest price pledge

Retail:$36.33

Our Price: $11.40

You Save: 69%
Ball Mounts

Orders above $99 qualify for Free Shipping

Shipping Weight: 6 lbs

Quantity: 
In Stock
Ball Mounts 36071 - Class II,3500 lbs GTW - Draw-Tite
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Class II
  • 3500 lbs GTW
  • Drop - 3 Inch
  • Rise - 2 Inch
  • Draw-Tite
  • No Ball
  • Steel Shank
Sturdy steel ball mount with solid shank measures 7-3/16" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection. Call 800-298-8924 to order Draw-Tite ball mounts part number 36071 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K. Ball Mounts reviews from real customers.


  • All Info
  • Reviews (63)
  • Q & A (91)
  • Videos (1)
  • Photos
  • Why etrailer?

Draw-Tite Ball Mounts - 36071

Sturdy steel ball mount with solid shank measures 7-3/16" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II compatible only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 300 lbs
  • Length: 7-3/16" from center of hitch pin hole to center of ball hole
  • Rise: 2-5/8" from top of inside of hitch opening
  • Drop: 3-1/4" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


36071 Draw-Tite Ball Mount for 1-1/4" Hitches - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3,500 lbs

Replaces 90003






Video of Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Draw-Tite Class II Drawbar 2-5/8 Rise or 3-1/4 Drop Kit

Today we are going to show you Draw-Tite Class II Drawbar kit, part number 36071. The ballmount is designed to fit 1-1/4 inch, class II hitch receivers. It utilizes balls with 3/4inch diameter shanks. It is weighted for 3,000 pounds gross trailer weight and 300 pounds tongue weight. Included with the ballmount is a standard 1/2inch pin and clip to secure the drawbar inside the trailer hitch. :27

When used in the position like this we have a of 3/4inches from the top of the shank, to the top of the ball platform. When used in the rise position, we have 2-5/8ths inches of rise from the top of the shank to the top of the ball platform. :44

To mount it in the hitch, slide it in the receiver and line up the hitch pin holes. Once the pin holes are aligned, feed the pin through and we will secure it with a clip on the other side. That does it for Draw-Tite Class II Drawbar Kit part number 36071.


Customer Reviews

Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K - 36071

Average Customer Rating:  4.7 out of 5 stars   (63 Customer Reviews)

Sturdy steel ball mount with solid shank measures 7-3/16" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.

- 36071
by:

Real fast shipping on top of a great price lead to easy instalation. Done it all by myself with no problem but working the frame bolts out is tough. Make sure to run them back up and down while taking them out to avoid breaking. 402294


Comments

Great

B. S - 07/06/2018

40575

- 36071
by:

very sasfify 244132



- 36071
by:

The products I bought were very good quality and I have been so pleased with them. I bought this bike rack and all the things with it, due to my bad back. It has been so good not having to lift the bike up high! I was hit hard in the back and it did not do a lot of damage to the rack. I was very surprised when I saw it. It was bent when I pulled it down. My insurance replaced it. It proberly save my trunk from a lot of damage. So the quality of all of these products was extremely high!!!! 332687



- 36071
by:

You etrailer folks sure know how to spoil a customer. Since I'm a repeat purchaser of your products, I'm still amazed how quickly you fulfill the order and ship it out so promptly. I paid for standard shipping, but if I didn't know better I'd say that it was expedited shipping. The hitch was well engineered and excellent vehicle specific lighting kit with thorough instructions for both(2017 Chevrolet Malibu). You "guys" are a "Class Act"!. As Arnold Schwarzenegger would say, " I'll be Back" Best regards 388989


Comments

Thank you so much for following up with my purchase satisfaction. I sincerely appreciate your professionalism. Yes, very satisfied with the receiver, ball and wiring kit.

Jack B - 06/05/2018

39291

- 36071
by:

Great For antenna mount needing a 3/4 inch hole Bob K7POF 574335



- 36071
by:

Great price, great product, delivered as shown, and free shipping to boot. 612148



- 36071
by:

Product worked as advertised. Customer service was excellent, very helpful. I will order again when that time cones. 611454



- 36071
by:

Works exactly as described. 600948



- 36071
by:

Excellent quality. No problems. 553906



- 36071
by:

Didn't quite fit the receiver hitch toward the back, but certainly well-made. 549633



- 36071
by:

Good quality 513133



- 36071
by:

Great product and service 481265



- 36071
by:

Received quick. Looks good. 465366


Comments

Perfect.

Dale R - 01/06/2019

48293

- 36071
by:

Arrived quickly & in perfect shape. 458451


Comments

Very well. No problems at all.

Ben A - 12/08/2018

46499

- 36071
by:

Perfect for my Camry. Delivered on time. 457779



- 36071
by:

In a world where customer service is 6 prompts and 20 minutes away, the opposite happened here. The phone was promptly answered, the order was quickly placed, and parts arrived 2 days later. COULD NOT HAVE BEEN DONE BETTER!!!! Thank you, Danny 456321



- 36071
by:

Great draw bar 436977



- 36071
by:

Worked great, towed my boat last weekend 419746



- 36071
by:

Just what I needed 368194



- 36071
by:

It fit my car. Installation directions are understandable and all parts needed were present. I work on my cars a lot so for me everything fit and was easy. It seems to hold up well and is strong. 366895



- 36071
by:

Ordered for my Uncle and installed on his caravan. 362075



- 36071
by:

Great product, installed on my 2014 Subaru Outback. I've towed my small utility trailer probably 40 times with no issues at all. Highly recommended for the price. 360413



- 36071
by:

So far so good. Product arrived quickly with no damage. Installed from start to finish in 20 minutes. Perfect fit. The way it's designed the spare tire can still easily be removed. Exactly what I was looking for. I have not installed the wires yet but I'm sure they will go on as easily as the hitch. I will tell everyone I know that needs a hitch to look at etrailer.com first. Great price and great products. 350000



- 36071
by:

I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience. 319454


Comments

The products are great and working just fine!!!

Terry P - 12/11/2017

31704

- 36071
by:

Great but rattles a little within the hitch. Easy to fix. 317025



- 36071
by:

Let's face a fact here . . . . . if you're gonna install a trailer hitch on your vehicle, then you most like are going to need one of these ! May as well get the correct size ball while you are thinking about it ! And don't forget the bike carrier ! 293167



- 36071
by:

perfect and solid quality - quick delivery - good communication - great store ! 291148



- 36071
by:

Great product 221133



- 36071
by:

Worked great. 203599


Comments

Works great no problems

Norm - 06/14/2016

18572

- 36071
by:

whats to say it fit the hole. 198752


Comments

awesome

brad p - 05/29/2016

18128

- 36071
by:

The staff was the BEST to work with!! All parts fit! Shipping was fast.. Will not shop it again...will just buy here! Very Happy Kenny Peek Nashville,TN 161715



- 36071
by:

Item received in perfect condition. Thank you. 156083



- 36071
by:

Solid construction and works as adverti sed. 149801


Comments

Thanks for the follow up, Rachael. Hitch, wiring, etc. are all still working great. Glad we got it!

Jeff L - 09/09/2015

14806

- 36071
by:

I needed a mount to elevate the 2" ball for the kayak trailer to work properly with my Subaru Outback. This did the job. It will be on the road for the Labor Day weekend. 148673



- 36071
by:

This is the 4th or 5th hitch I've purchased from trailer. I come back because I know the quality brands and good customer service 112282



- 36071
by:

Draw bar was just as represented. 88016



- 36071
by:

Product arrived in good condition and fit perfectly. 86443


Comments

I use it regularly, Good product.

TJ - 12/26/2014

8199

- 36071
by:

Works as it is supposed to, and delivered on time. 85711



- 36071
by:

Installed perfectly into the tow bar 47182



- 36071
by:

Good fit for my car and hitch. 47117



- 36071
by:

Just the right part for the job. etrailer.com is the best company to for all your trailering needs. 46436



- 36071
by:

The drawbar itself is great. I just wish I'd gotten a longer version for my 96 Subaru Outback wagon. In the rise position it's obstructed by the bumper and won't go in far enough to insert the pin. The drop position is fine. 45811



- 36071
by:

Right size. 36862



- 36071
by:

Works as intended, pretty rock solid. Note on here said to only use it in the RISE position, not the drop position. 36608



- 36071
by:

Geat product. 34437



- 36071
by:

fast shipping 34347



- 36071
by:

excellent 34102



- 36071
by:

As expected 33353



- 36071
by:

Great instructions and ease of installation. Great customer service. 32515



- 36071
by:

The products can very fast ,they were packed well .I have no complaints .I am very happy with my order. 29159


50
63
Show More Reviews

Ask the Experts about this Draw-Tite Ball Mounts
Do you have a question about this Ball Mount?


  • Can the 2017 Toyota Camry Hybrid Tow a Trailer
  • I checked the owner's manual online for the 2017 Toyota Camry hybrid and all it says is that towing a trailer is not recommended. It doesn't say you can't but it also does not provide a towing capacity for the vehicle. So it is up to you on whether or not you want to go ahead and tow the trailer. I can definitely tell you the hitch, wiring and accessories you will need. For a trailer hitch you can use # 36540. In addition to the hitch you will need a ball mount, # 36071. If the trailer...
    view full answer...

  • What is Needed to Tow a Trailer with a 2018 Toyota Camry Hybrid
  • We do get a lot of questions like this. It's exactly what we're here for. And also we do have the parts you need to tow a trailer with your 2018 Toyota Camry Hybrid. However, I also checked the online copy of your owner's manaul and it states that your vehicle is not rated to tow. I recommend verifying with your manual or talking to Toyota before towing to find out if you can tow a trailer, and how heavy it can be if you're able to tow. With that being said, if you determine your...
    view full answer...

  • How Can I Get the Most Towing Capacity Out of a 2018 Chevy Malibu
  • I looked at the owner's manual for your 2018 Chevrolet Malibu and it states that the trailer should never be heavier than 1,000 pounds. It goes into more detail that other factors can influence the capacity (such as speed, altitude, temperature, and others) and that you should contact GM for specific information. Long story short the absolute maximum capacity of your Malibu is no more than 1,000 pounds for sure. With that being said, we do have the parts you need to get the Malibu...
    view full answer...

  • Class II Ball Mount With 3-1/2 Inch To 5 Inch Drop For Ford Explorer
  • For a 1-1/4 inch hitch receiver on your Ford Explorer, we have two ball mounts that fall within the 3-1/2 to 5 inch drop range. The first one is the Draw-Tite Class II Ball Mount, part # 36078. This ball mount has a 4-3/4 inch drop and measures 7-1/2 inches from the center of the hitch pin hole to the center of the ball mount hole. It has a tongue weight rating of 300 pounds and a towing weight capacity of 3500 pounds. The pin and clip are included with this ball mount. The second ball...
    view full answer...

  • Recommended Trailer Hitch For 2008 Toyota Camry SE V6
  • Yes, we do have a hitch that will fit your 2008 Toyota Camry SE V6, but the item you selected, Curt Trailer Hitch, part # 12343, will not fit the SE model of the Camry. I would recommend the Draw-Tite Trailer Hitch Receiver, part # 36416, which is a Class II 1-1/4 Inch Hitch. To complete your towing setup you may be interested in the following: Draw-Tite Ball Mount, part # 36071 1-7/8 Inch Hitch Ball, part # 19256 2 Inch Hitch Ball, part # 19258 Pin and Clip, part # PC2 T-One Vehicle...
    view full answer...

  • Can I Tow A Trailer With A 2013 Toyota Camry?
  • Per the manufacturer, Toyota does not recommend towing any type of trailer with the 2013 Toyota Camry. The last generation of Toyota Camry's sold here in the U.S. from 2007-2011, had a max tow rating of 1000 lbs. Although I cannot recommend you tow a trailer with your Camry, a trailer hitch such as the Draw-Tite Trailer Hitch Receiver part # 36540 is perfectly capable of hauling rear mounted accessories such as a bike rack or cargo carrier. I have attached an installation video of the...
    view full answer...

  • Trailer Hitch Recommendation for a 2010 Toyota Camry SE with Dual Exhaust
  • The Draw-Tite trailer hitch # 36416, can accommodate a 2010 Toyota Camry with dual exhaust. Take a look at the picture I have included. You can see that the symmetrical design of the hitch leaves enough room for the exhaust on both sides of the vehicle. I have also linked instructions and a video for you. If you plan on doing some towing the correct ball mount is # 36071 and you can use pin and clip # PC2. For a ball use # 19256 for a 1-7/8 inch diameter or # 19258 for a 2 inch diameter....
    view full answer...

  • Towing Capacity of 2011 Honda Odyssey Fitted with Draw-Tite Hitch 36417
  • The Class II Draw-Tite hitch # 36417 has a maximum rated towing capacity of 3500-lbs. This rating applies to the hitch itself and the Odyssey could potentially have a lower or higher towing capacity depending on the particular engine, transmission and accessory options installed at the factory. I reviewed an online edition of the owner's manual for the 2011 Odyssey and on page 589 the towing capacities, based on passenger count, are listed. These range from the maximum trailer weight...
    view full answer...

  • Trailer Hitch Recommendation for a 2009 Jeep Wrangler
  • It is a tight fit when installing the Draw-Tite trailer hitch # 36424 on a 2009 Jeep Wrangler. But, the nuts are welded to the hitch itself and the bolts come through from the back of the hitch and into the nuts. You do not have to loosen or remove the bumper beam to install the hitch. This is a Class II trailer hitch with a 1-1/4 inch receiver. I highly recommend a Class III, 2 inch trailer hitch because it has a higher capacity (can be used with weight distribution) and the 2 inch...
    view full answer...

  • Will the Draw-Tite # 36416 Fit on a 2011 Toyota Camry SE with Dual Exhaust
  • The Draw-Tite Trailer Hitch, # 36416, will fit on a 2011Toyota Camry with dual exhaust. Take a look at the photo I added for you. You can see that the design of the hitch leaves enough room for the exhaust on both sides of the vehicle. I have also linked instructions and a video for you. At this time there is not a hitch available for the 2011 Toyota Camry SE that does not require bolting to the underside of the spare tire well. If you plan on doing some towing the correct ball mount...
    view full answer...

  • Trailer Hitch Recommendation for a 2011 Toyota Camry SE with Dual Exhaust
  • The Draw Tite Hitch part # 36416 is confirmed to fit your 2010 Toyota Camry SE that has dual exhaust. I confirmed this with Draw Tite. We also had a customer with basically your exact Camry email us and tell us that this hitch worked well on his vehicle. I attached an install video for you to check out as well. For trailer wiring you would want the # 118482, ball mount part # 36071, 1-7/8 inch ball # 19256, 2 inch ball # 19258.
    view full answer...

  • Trailer Hitch and Wiring for a 2018 Toyota Camry XSE
  • I checked with Draw-Tite about trailer hitch # 36643 and they do say it is a fit for all styles of the 2018 Toyota Camry. We also have not had anyone complain that the hitch did not fit due to interference from the exhaust components. The recommended ball mount for this hitch is # 36071. For a 2 inch ball use # 19258 or if you need the smaller 1-7/8 inch ball it is # 19256. And for a trailer wiring harness you can use # 118763 to add a 4-Way flat connector to the rear of the vehicle.
    view full answer...

  • Will Draw-Tite Trailer Hitch # 36540 Fit a 2012 Toyota Camry SE and Can the Car be Used for Towing
  • First, if the owners manual states that you cannot tow with the vehicle, then I cannot recommend going against that. If the owners manual is unclear, you will need to contact your Toyota dealer or Toyota directly to determine if the car can be used for towing and, if so, what the capacity is. The Draw-Tite trailer hitch, # 36540, is listed as a fit for all models of the 2012 Toyota Camry, including the SE. It also fits hybrid models. I have included a link to the installation instructions...
    view full answer...

  • Rear Fascia Removal for Hitch Installation on New Body 2016 Chevy Malibu
  • On your 2016 Chevy Malibu the fascia will need to be pulled off once all the fasteners are removed because it is still sort of compression fit in with the adjoining body panels. Once removed what you will see is some of the skeletal parts of the vehicle. Specifically you will be working in the area of the steel bumper beam at the rear of the vehicle. The instructions which I have linked for you have some good pictures. Since you will be doing some towing the recommended ball mount is...
    view full answer...

  • Is the # 36416 Hitch Picture an Accurate Picture or a Typical Photo for 2010 Toyota Camry SE
  • The pictures on our site are of the actual Draw-Tite Trailer Hitch, item # 36416 and the installation video is an actual installation we did on a 2010 Toyota Camry. Our site uses actual pictures for all of the items we carry unless otherwise stated as a typical photo. I went to the Draw-Tite site and saw that they are using a typical photo for this part number but if you pull up the installation instructions (see link) you will see that the drawing for the # 36416 hitch is the same as...
    view full answer...

  • Will the Draw-Tite Trailer Hitch # 36416 Fit on a 2011 Camry SE
  • The Draw-Tite Trailer Hitch, # 36416, will fit on the 2011 Toyota Camry Se. We have a video installation for you to review and installation instructions, see link. If you will be carrying bikes with this hitch on your Camry, the Thule Doubletrack Pro Bike Rack, # TH9054, is one of the most popular bike rack chosen by our customers that own Camrys. If you will be towing with your Camry, I have listed some items you may need to complete your Class 1 towing setup. Sportframe Drawbar,...
    view full answer...

  • Trailer hitch, Ball Mount, Ball, and Wiring for a 2006 Subaru Legacy Sedan
  • First, lets look at the trailer hitches for your 2006 Subaru Legacy sedan. There are both Class II and Class III trailer hitches available. Any time there are different Class hitches available for a vehicle I always recommend going with the higher Class. This is because the higher Class hitches have a higher capacity and have more accessory options. With a Class II hitch you are going to also be limited to using one specific ball mount so that makes it harder to choose the proper ball...
    view full answer...

  • Hitch With Most Ground Clearance for 2015 Honda Odyssey
  • Having low ground clearance at the rear of a minivan is the nature of the beast. Of the hitches we offer for your 2015 Odyssey, the Curt Class II hitch, part # C12031 would offer the most clearance, about 12 inches under the receiver which is about 2-1/2 inches more than what you'd get from the Draw-Tite # 36419 or other hitch options. If you were planning on towing with the hitch, you'd need the following to complete your towing system: Trailer wiring harness w/ 4 pole connector,...
    view full answer...

  • Ball Mount Recommendation for a 2012 Mercedes GLK 350 with Class II Hitch
  • Your Class II hitch should have a weight rating of 3,500 lbs, check the hitch specifications to be sure. In this case we would recommend using a Class II rated ball mount, that has the proper drop or rise for towing your trailer. I added a link to all of the Class II ball mounts that we carry for you to select from. Normally trailers are set up with an 18 inch coupler height, so if you do not have a trailer to measure you can select a ball mount based on 18 inches and be very close with...
    view full answer...

  • Does Draw Tite Hitch # 24920 Fit 2018 Honda Fit Sport
  • For your 2018 Honda Fit Sport the Draw Tite hitch part # 24920 is a confirmed fit and would work well. For trailer wiring you then would want the ZCI kit part # 119250KIT as it fits your vehicle and does not require any splicing. For a ball mount you'd want the part # 36071 and for a 1-7/8 inch hitch ball # 19256.
    view full answer...

  • Will Draw-Tite Class II 1-1/4 Inch Hitch # 36334 Fit a 2009 Subaru Legacy 2.5 Limited
  • The Draw-Tite Class II 1-1/4 Inch Hitch, part # 36334, will fit your 2009 Subaru Legacy 2.5 Limited. I am including a link to the installation instructions on the hitch. If you are going to do some towing, the recommended ball mount is Draw-Tite Ball Mount, part # 36071. For a hitch ball you can use Tow Ready 1-7/8 Inch Hitch Ball, part # 19256, or Tow Ready 2 Inch Hitch Ball, part # 19258. For trailer wiring, use Tow Ready Wiring Harness, part # 119176KIT. I have included a link...
    view full answer...

  • Trailer Hitch and Wiring for a 2017 Chrysler Pacifica
  • The Curt Class II hitch that fits the 2017 Chrysler Pacifica is # C12180. But if you want to use this hitch for an accessory such as a bike rack or cargo carrier Curt requires the use of stabilization strap # 18050 per their warranty requirements. To avoid having to use the strap I recommend using Draw-Tite hitch # 36798 which does not have the strap requirement. If you plan on doing some towing the recommended ball mount is # 36071. For a 1-7/8 inch ball use # 19256 and for a 2 inch...
    view full answer...

  • Recommended Wiring Harness and Other Parts Needed to Tow a Trailer with a 2017 Kia Niro
  • I recommend the Tekonsha # 119147KIT wiring harness for your 2017 Kia Niro. It's a universal harness because there are no wiring options available for your vehicle. The Tekonsha works with almost all wiring and lighting types and uses a powered converter to protect the vehicle's sensitive wiring. I've included an install video on another vehicle but the process will be very similar for yours. If you don't already have a trailer hitch receiver I recommend the Curt # C13329. It's...
    view full answer...

  • Draw-Tite Trailer Hitch and Wiring for a 2015 Buick Encore
  • At the time the answer you are referring to was written, Draw-Tite trailer hitch # 36554 was not a confirmed fit for the 2015 Buick Encore. They have since tested it and it is now a confirmed fit for 2013 to 2015 Buick Encores. If you plan on towing with the hitch the correct ball mount is # 36071. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118588 to add a 4-Way flat connector.
    view full answer...

  • Recommend Correct Hitch For 2005 Ford Five Hundred Sedan
  • The item you selected, Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4, part # 36360, is the correct receiver for 2005 Ford Five Hundred Sedan and will fit great. The Ford Five Hundred and Ford Freestyle share the same chassis. To complete your towing setup with part # 36360, you may be interested in the following items: Class II Drawbar, part # 36071 1-7/8 Inch Hitch Ball, part # 19256 2 Inch Hitch Ball, part # 19258 T-One Vehicle Wiring Harness, part # 118395 Pin...
    view full answer...

  • Does Rear Fascia Have To Be Cut When Installing Draw-Tite # 36529 on 2013 Ford Escape
  • It will not require any cutting or modification to the rear fascia when installing the Draw-Tite Class II 1-1/4 Inch Hitch, part # 36529, to your 2013 Ford Escape. It is just a bolt-on application. I am including a link to the installation instructions on the # 36529 hitch. To complete your towing setup you may also be interested in purchasing the following: Draw-Tite Ball Mount, part # 36071 Tow Ready Wiring # 118566 (installation instructions attached) Tow Ready 1-7/8 Hitch Ball,...
    view full answer...

  • How to Select a Ball Mount for My 2001 Ford Escape to Tow a Small Tracker Boat
  • To determine the correct 1-1/4 inch ball mount to use on your 2001 Ford Escape you will need do a little math. Things like vehicle and trailer tire size and coupler height and hitch height require us to measure to get the correct ball mount to properly tow the trailer. Simply measure from the ground to the top of your receiver opening on the Escape, then measure from the ground to the bottom of the trailer coupler where the ball goes in, with the trailer frame as level as possible. The...
    view full answer...

  • Trailer Hitch Recommendation for 2018 Honda Fit for Carrying Bike Rack
  • Since the Curt Class I hitches require the use of a stabilizer strap when carrying a non-supported load like a bike rack the Draw Tite part # 24920 is the best hitch option for your 2018 Honda Fit. For trailer wiring you'd then want the part # 118767 which is a confirmed fit as well. For a ball mount part # 36071 and hitch ball part # 19256.
    view full answer...


Do you have a question about this Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Laura H
Photos by:
Zach O
Updated by:
Sarah W
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.