See what our Experts say about this Draw-Tite Trailer Hitch Ball

• Trailer Hitch and Wiring Recommendation for 2014 Chevy Impala
  We have hitches that fit your 2014 Chevy Impala like the Draw Tite Class II hitch part # 36543 which is what I recommend. It installs easily and also gives you a mostly hidden solution. This is a bolt on hitch that does not require any welding. For trailer wiring our most reliable option is the Tekonsha # 118590 which I recommend for you. For a ball mount the # 36061 is the required part number and then for a ball # 19257.
  view full answer...
• Best Trailer Hitch Receiver for a 1999 Buick LeSabre
  We currently only have one trailer hitch receiver for your 1999 Buick LeSabre which is the Draw-Tite Trailer Hitch Receiver part # 36216. This option will give you a Class II hitch with a 1-1/4" receiver tube opening. I have attached an installation video on a similar 1997 Buick LeSabre for you as well. If you can tell me what you will be using the hitch for I would be glad to offer some additional recommendations for you as well.
  view full answer...
• Trailer Hitch and Wiring for a 1996 Buick Roadmaster
  We have a class II hitch that will fit your 96 Buick Roadmaster. The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Item # C12009. We haven't had the chance to install this hitch on a vehicle, but it is rated for a 50 minute install and has some drilling required. You can see the installation steps in the instructions I have linked. This Class II hitch is the only option for your vehicle so provided that its 3,500 pound capacity as well as the car's capacity are high enough...
  view full answer...
  
• Choosing a Ball Mount with Enough Rise to Tow a Trailer Level with a 2014 Honda Civic Sedan
  Yes, that makes perfect sense. What you are talking about is rise and drop. If the vehicle hitch is lower than the trailer coupler with the trailer level then you will need a ball mount with a rise to compensate. If the vehicle was higher the ball mount would need to have a drop. To figure out the rise you will need you can use the trailer jack to make the trailer level then measure from the ground to the bottom of the coupler. Then you would compare that to the hitch measurement taken...
  view full answer...
• Trailer Hitch and Wiring for a 2017 Volkswagen Golf Alltrack
  Trailer hitch # 24949 is a fit for the 2017 Volkswagen Golf Alltrack. It also is listed for all models of the 2017 Golf Sportwagen. I have included a link to the installation instructions for you. If you plan on doing some towing the recommended ball mount is # 3590. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118730 to add a 4-Way flat to the rear of the vehicle. If you want to use the hitch for an accessory such as a bike...
  view full answer...
• How Hard is it to Install a Trailer Hitch on a 2013 Cadillac XTS
  The installation difficulty for Draw-Tite trailer hitch # 36538 for a 2013 Cadillac XTS is listed as a 5 out of 10. The scale is based on estimated time to install the hitch with each tick on the scale representing 10 minutes. So at a 5 it would take a professional approximately 50 minutes to perform the installation. We usually estimate a novice will take twice as long so that would be 1 hour and 40 minutes. If you plan on doing some towing the recommended ball mount is # 36061 and it...
  view full answer...
• Hitch Recommendation for a 1997 Oldsmobile 88 for Towing
  For a hitch confirmed to fit your 1997 Oldsmobile 88 you would want the Draw Tite Hitch part # 36211. This hitch will attach to the frame of your vehicle and has towing capacities of 3,500 lbs total trailer weight and 300 lbs tongue weight. You will need to check the owners manual of your vehicle to determine the capacity for the vehicle and be sure not to exceed this figure. To complete your towing setup you may also be interested in the following products. Class II Drawbar 3-1/8" Rise...
  view full answer...
• Trailer Hitch and Wiring for a 2000 Mercedes E320 Sedan
  The only trailer hitch for the 2000 Mercedes E-Series is Curt hitch # C11744. The recommended ball mount for this hitch is # C45521. And for a 1-7/8 inch ball use # 19257 and for a 2 inch use # 19258. For a wiring harness you can use # C59496 to add a 4-Way flat connector to the rear of the vehicle.
  view full answer...
• Modifications Needed for 2014 Chrysler 300S To Install Class II Trailer Hitch
  According to the installation instructions for the Draw-Tite Class II trailer hitch, part # 36548, there is no cutting or modification if the bumper fascia required (see linked instructions). However, on 2011 and newer vehicles, there's a plastic appearance panel under the vehicle that would need to be removed and left off the vehicle. There is a trailer wiring harness available, part # C56145. If you'll be towing with this hitch, you'll need a ball mount like # 36051 but remember to account...
  view full answer...
• Trailer Hitch Recommendation and Towing Capacity for 2003 Toyota Camry
  I'd recommend confirming this with the owners manual of your 2003 Toyota Camry, but I was able to find a 2,000 lb towing capacity for your vehicle which should be adequate for a motorcycle trailer like you plan on towing. Now we have Class II hitches available for your vehicle like the Draw Tite part # 36336 which are rated higher than that at 3,500 lbs trailer weight, but you have to go with the lowest rated component in your tow setup as the overall capacity as you're only as strong...
  view full answer...
• Towing Capacity, Trailer Hitch and Wiring for a 2013 Toyota Corolla
  I checked the owner's manual for the 2013 Toyota Corolla. It states that the maximum gross trailer weight the vehicle can tow is 1,500 pounds if the trailer has brakes or 1,000 pounds if the trailer does not have brakes. But only for models with a 2.4 liter motor. At 1,200 pound you are under that 1,500 pound limit for a trailer with brakes. But towing will put additional stress on the vehicle. For a trailer hitch I recommend # C11265. The recommended ball mount is # C45521. For a 1-7/8...
  view full answer...
• Trailer Hitch and Towing Capacity of a 2008 Chevrolet Impala
  From my research the 2008 Chevy Impala can tow up to a 1,000 pound trailer. You want the loaded trailer to stay under 1,000 pounds. As far as not scraping the ground I'm not sure what you're referring to but if the trailer is not overloaded and is loaded with the tongue weight between 10 and 15 percent of the trailer's weight then you shouldn't have any issues. You also want to make sure the trailer is level when towing. As for the hitch receiver I recommend the Draw-Tite # 36407. ...
  view full answer...
• Can the 2014 Kia Soul + Tow a 1,200 Pound Trailer
  I checked the vehicle owner's manual and all it says is that it is not recommended to tow a trailer with the 2014 Kia Soul (any model). But it also does not say you can't and there are numerous references to towing throughout the manual. So my interpretation is that you could tow a trailer but how heavy is unclear. I would say that at 1,200 pounds that is probably the max you would want to tow. Also, at 75 pounds that tongue weight is too light and that will make the trailer susceptible...
  view full answer...
• Towing Capacity and Trailer Hitch Recommendation for 2017 Chevy Impala
  From what I found online it looks like your 2017 Chevy Impala has a towing capacity of 1,000 lbs. If the weight of your trailer loaded is less than 1,000 lbs then yes you could tow it. For a hitch then we have the Draw Tite part # 36538 which is a confirmed fit for your vehicle and would work well. For a ball mount you'd then want the # 36061 which is the recommended ball mount by Draw Tite. For a hitch ball part # 19257. For trailer wiring you'd then want the Tekonsha kit part # 118590...
  view full answer...
• Towing Capacity of a 2016 Ford Fusion SE and Trailer Hitch and Wiring Recommendations
  The towing capacity of the 2016 Ford Fusion is going to depend on the powertrain in the vehicle: 1.5L GTDI models have a 1,000 pound towing capacity 2.0L GTDI models have a 2,000 pound towing capacity 2.5L TiVCT models have a 1,000 pound towing capacity 2.7L GTDI models have a 1,000 pound towing capacity None of the models can tow 2,800 pounds. If yours has the 2.0 liter motor then that would have the highest capacity at 2,000 pounds. You are limited to the capacity of the vehicle since...
  view full answer...
• What is the Towing Capacity for a 2001 Subaru Outback and Trailer Hitch and Wiring Recommendations
  It took a little research but I was able to find the towing capacity information for the 2001 Subaru Outback in the online owner's manual. For manual transmission models and a trailer with no brakes the towing capacity is 1,000 pounds; with brakes it is 2,000 pounds. It is the same for automatic transmissions (1k without brakes or 2k with brakes) but also Subaru says: When towing a trailer on a long uphill grade continuously for over 5 miles (8 km) with an outside temperature of 104°F...
  view full answer...
• Does Curt Hitch C12028 Fit a 2005 Monte Carlo SS
  Yes, the Curt hitch part # C12028 that you referenced is a confirmed fit for your 2005 Chevy Monte Carlo SS with a supercharged 3.6 liter. The ball mount you would need is the part # 36061 and then for a hitch ball part # 19258 for a 2 inch ball or part # 19257 for a 1-7/8 inch ball. For wiring you then would want the part # 119178KIT which is a confirmed fit.
  view full answer...
• How to Carry a Mobility Scooter with a 1999 Toyota Camry
  I do have an option for you but the highest rated trailer hitch receiver they make for a 1999 Toyota Camry is a Class II, to my knowledge. I would be very skeptical that a Class III or IV exists due to the size of the vehicle. For a Class II trailer hitch with a 1-1/4" receiver tube opening I recommend the Draw-Tite Trailer Hitch Receiver part # 36336. This trailer hitch has a 300 lb tongue weight (TW) rating however, the vehicle is likely lower and if that is the case then this will need...
  view full answer...
• Trailer Hitch & Wiring For 2015 Mercedes-Benz C300 Sedan
  We do have a trailer hitch receiver, as well as the wiring harness, ball mount, and hitch ball you need for your 2015 Mercedes-Benz C300, so long as it is the sedan version of the vehicle. What you will need are the following parts in order to tow your small boat trailer: - Curt Trailer Hitch Receiver # C11485 - Curt Class II Drawbar # C45521 - 2" Hitch Ball # C40018 or 1-7/8" Hitch Ball # 19257 - Hitch Pin and Clip # F-4 - ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat...
  view full answer...
• Trailer Hitch Receiver and Wiring Harness For a 2019 Infiniti Q50 Red Sport
  According to Draw-Tite their Sportframe Trailer Hitch Receiver # 24931 fits all models including the Red Sport trim on your 2019 Infiniti Q50. Draw-Tite recommends using the Ball Mount # 3592 with a 1-7/8" # 19257 or 2" # C40018 hitch ball. You will be able to hold the ball mount using a Pin and Clip # F-4 or you can secure it with the trailer using the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT. The Curt T-Connector Vehicle Wiring Harness # C56248 will provide...
  view full answer...
• Trailer Hitch and Wiring for a 1999 Ford Escort ZX2
  The only trailer hitch available for the 1999 Ford Escort ZX2 is a Class I hitch # C11105. The recommended ball mount is # C45520. For a 1-7/8 inch ball use # 19257 and for a 2 inch use # 19258. For trailer wiring use # 118344 to add a 4-Way flat connector to the rear of the vehicle. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited...
  view full answer...
• Recommended 4-Way Flat Connector for a 1999 Subaru Legacy Outback Wagon
  If your 1999 Subaru Legacy Outback Wagon came with the factory tow package then you will need the Tekonsha T-One # 118461 which simply plugs into the plug that you found at the rear of your Outback Wagon. I have attached a sample installation video you can reference. If you will be using this for towing but you do not have a trailer hitch yet then I recommend going with the Curt Trailer Hitch Receiver # C12270. This is a Class II receiver with a 1-1/4 inch hitch receiver opening rated...
  view full answer...
• Recommended Trailer Hitch for 2015 Dodge Charger Hellcat
  I called my contact at Curt and asked about the Trailer Hitch Receiver, part # C12064. They said they could not guarantee it would fit your Hellcat. It is a Class ll hitch and has a 1-1/4 inch receiver opening. I also called Draw-Tite and asked about the fit of the # 36548 Class ll hitch. They said this hitch will work with your Charger Hellcat. This hitch has a 1-1/4 inch opening. If you are going to tow with the hitch I recommend part # 36061 for a drawbar. This has a 3-1/8 inch rise...
  view full answer...
• Does Curt Trailer Hitch Receiver Fit 2022 Nissan Kicks
  Indeed it does! I just verified with Curt that their hitch does fit the 2022 Nissan Kicks; the correct part number is the following: - Curt Trailer Hitch Receiver # C11563 This is a nice option to add to your '22 Kicks as it has a concealed crosstube so only the receiver is going to show, helping your Nissan keep its factory appearance. If you plan to use it for an accessory like a bike rack or cargo carrier you're all set, but if you plan on using the # C11563 for some light towing,...
  view full answer...

Do you have a question about this Trailer Hitch Ball?