bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class IV
  5. 10000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Part Number: 14361
In Stock
$317.72
Retail:$502.95
You Save: $185.23
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
CURT Trailer Hitch - 14361
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" part number 14361 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (25)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - 14361

  • 2 Inch Hitch
  • Class IV
  • 10000 lbs GTW
  • Visible Cross Tube
  • 1000 lbs TW
  • CURT
  • 12000 lbs WD GTW
  • 1200 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 10,000 lbs
      • Maximum GTW when used with weight distribution: 12,000 lbs
    • Maximum tongue weight: 1,000 lbs
      • Maximum TW when used with weight distribution: 1,200 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



14361 Curt Class 4 Trailer Hitch Receiver

Installation Details 14361 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 14361

Average Customer Rating:  4.8 out of 5 stars   (25 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Package was damaged, and paint was chipped. Quality of the shipping and packaging department needs to be improved. Hitches have weight to them and need to be more protected and boxes need to be better quality for strength.

Jenny N. profile picture
Etrailer Expert

Jenny N.

9/1/2023

Thank you for letting us know! I recommend touching up the hitch with a rust resistant paint like Rustoleum prior to installation. I will have our Customer Service team reach out to you.



by:

The hitch is well built, and exactly what I was looking for: a beefier option than the factory that sits up close to the bumper. The factory receiver would bend down with less than the rated tongue weight.

Since my truck came with the factory towing package, I had two options cut the receiver portion off of the bumper brace, or remove the bumper brace. I didn't like the idea of removing the bumper brace, so I opted to cut off the factory receiver. This can be done with a combination of cut-off discs and a long metal cutting blade on a powered hack saw.

The specifications for this product state that this is only for the 8'bed. I was told that there would be some slight interference with an exhaust hanger, that could be modified. I didn't encounter any issues with the exhaust, and the only modification needed was to drill 1/2" holes for the forward mounting bolts.

Since the bolts need to be dropped in through the frame rails, it is fantastic that Curt includes a special tool to guide the bolts into position. They would have been a real bear to install without them.

There could be potential to reinforce it further by connecting the receiver to the bumper support. I debated this, but decided to wait to see if it needs any with the loads I will be hauling.

The packaging it was shipped in was simply a cardboard box, so of course there wasn't much left of the box by the time it arrived. Fortunately the Curt's powder coating was substantial, and not much scratching occurred, but I wouldn't recommend for a show truck.



by:

It was a great hitch that fit perfectly. Easy to follow instructions

Charlie profile picture

Charlie

9/3/2023

It was installed on a friends wifes truck and its working as advertised. Great product that easy to install



by:
2005 Dodge Ram Pickup

I had a difficult time finding & choosing a receiver hitch for my older Dodge until I checked etrailer.com. The amount & quality of the information available made it much easier to find an applicable hitch. I was pleasantly surprised with their best price guarantee & at how quick it arrived. There was a little bit of a learning curve with the install kit, but again, the quality information & tip videos on the etrailer site made the job very easy...& as advertised for my hitch...NO DRILLING REQUIRED! I would recommend etrailer.com to anyone needing towing equipment & will use them again myself in the future.

J G. profile picture

J G.

6/25/2020

Still as advertised...Perfect! Would buy again!



by:
2004 Dodge Ram Pickup

Hitch arrived earlier than expected. Box was beat up and hitch paint marked up. One nut somehow came out of the bag but thankfully did not fall out of the box. Hitch could have been wrapped so shippers couldn’t take away from the factory finish. Beyond that, hitch was easy to install. The wire to fish through to pull the bolts into place was brilliant once I realized you push it through then attach the bolt into it.

Kevin profile picture

Kevin

7/1/2021

No issues with the hitch after 6000 miles towing wit it. Still looks as new, minus the original shipping chips.



by:
2003 Dodge Ram Pickup

This is a great receiver hitch - well made, is a true no drill installation and fits the ball mount perfectly on my 2003 Dodge Ram 2500.

However, the directions need a bit of clarification/re-writing since on a Ram 2500 (and possibly other Ram trucks) the fasteners need installed in a particular order due to space restrictions. I'd recommend the following procedure. Install the square and rectangular washers used in the frame tubes. You'll need a 3 foot piece of #12 copper wire and some tape to get the rectangular washer into position. It looks like it'd go through the frame hole but mine was just a bit too big so I attached the wire to it and fished it into position like you'll do with the screws later.

Next, attach one of the screws to the fish-wire. Have a buddy help hoist the hitch into place and then use the fish wire to get a bolt into the rearmost vertical hole near the end of the tube. Screw on the nut - repeat on the other side. Align the hitch, then tighten down and torque to 110 lb-ft. This needs done since there is almost no way to properly torque it with the flange bolt installed...just not enough room. See photo.

Install the other fasteners and torque down...done!

Look forward to towing a travel trailer with this hitch!



by:

Solid hitch and easy install. Aftermarket exhaust was in the way so it took a little longer than normal due to having to move hanger mounts.

Jason profile picture

Jason

4/9/2021

Great, no issues. Still looks brand new.



by:

I've had it a year now and its as nice now as it was when I bought it. No slop in the receiver and it still has a nice coat of paint. I live in the rust belt so its standing the test of time. Good value good product great service at etrailer.com.



by:
2007 Dodge Ram Pickup

I am completely satisfied with the service I received from etrailer! I contacted customer service through email and was provided with an expert reccomendation that completely answered my needs. I can't wait to get all the pieces installed!



by:

Very easy and quick installation. Simple and good instructions. The leading wire was very helpful.



by:

Thank you---for your incredible service and help. I really appreciate communicating with your service people. UPS lost my first ordered hitch but e-trailer made everything right. The second hitch didn't arrived on Monday but did arrived on Wednesday evening.
I'm thankful for the great service of e-trailer and those who still care about customers.
Respectfully
Robert Hanie



by:
2006 Dodge Ram Pickup

Receiver my order fast. It was easy to install. Looking forward to years of use ??



by:
2005 Dodge Ram Pickup

installed in 20 minutes, great fit, great hitch!

Vince profile picture

Vince

1/8/2015

One year later this solid steel hitch is solid-



by:

ordered and delivered



by:

So far I have nothing bad to say about the product, or the company. I ordered it last week and even with a holiday I still got my order within 5 days. Easy instructions little time. The true test of the product will be in a couple weeks. But I will definately be using this website again, and will be recomending it to all my friends. Thanks All



by:
2005 Dodge Ram Pickup

Great products and the best thing is the quick delivery and now freight charges! Etrailer seems has a great selection of product also.



by:

Product looks good except during shopping it got so banged up the box wasn’t even in tact.



by:
2005 Dodge Ram Pickup

Very secure



by:
2003 Dodge Ram Pickup

Excellent delivery turnaround time !



by:
2004 Dodge Ram Pickup



by:



by:



by:



by:



by:


25
25

See what our Experts say about this CURT Trailer Hitch

  • Difference In Draw-Tite Class IV Hitch Compared To Lower Priced Class IV Hitch
    When comparing the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class IV, part # 41929, to the Curt Trailer Hitch Receiver - Class IV, part # 14361, they are similar, but the new version of the Draw-Tite # 41929 is rated higher. The Draw-Tite Class IV Hitch has a tongue weight capacity of 1,200 pounds and towing capacity of 12,000 pounds. The Curt Class IV Hitch has a tongue weight capacity of 1,000 pounds, and towing capacity of 10,000 pounds. Both part # 41929, and part # 14361 have...
    view full answer...
  • Trailer Hitch Receiver and Wiring To Pull a U-Haul Trailer With a 2006 Dodge Ram 1500 Reg Cab 6' Bed
    Yes, the Curt Trailer Hitch Receiver # 14361 will fit your 2006 Dodge Ram 1500. It is a class IV 2" receiver that is rated for a trailer weight of 10,000lbs and 1,000lbs of tongue weight. With a weight distribution hitch the capacity increases to 12,000lbs of trailer weight and 1,200lbs of tongue weight. Be sure to reach out to a Dodge dealer with your VIN so that they can give you the maximum weight capacities of your Ram 1500. The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41929...
    view full answer...
  • Why Won't The B&W Trailer Hitch Receiver Fit a 2005 Dodge Ram 1500 Short Bed With Factory Receiver?
    The B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25211 we found hit a factory exhaust hanger on the short bed version of your 2005 Ram 1500. While this will fit with a simple relocation of the hanger we put the note saying it will only work on the 8' bed since it requires modification. Since you want the receiver to fit snug as possible to your factory bumper you might consider the Curt Trailer Hitch Receiver # 14361 since the B&W and all other receivers designed to fit with the factory...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2010 Ram 3500 With Ranch Hand Legend Bumper
    The Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 41929 will sit 9 inches from the bottom of the vehicle frame rails to the top of the receiver tube. This will work well with the ranch hand bumper you have and won't make the drop seem so drastic. If you go with a hitch that is not for the OEM hitch receiver installed, you can use the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14361 which measures 6-1/2 inches from the frame to the top of the...
    view full answer...
    Image 1 for
  • Correct Trailer Hitch Receiver for a 2003 Dodge Ram 1500 Made After and Before Nov. 2002
    If the white sticker inside the driver door jamb on your 2003 Dodge Ram 1500 reads 07/2002 as the date of manufacture, the correct Curt Trailer Hitch Receiver for you will be part # C14020, not part # 14361 which is for trucks made after 11/2002. This trailer hitch has the same class IV rating, 2" receiver tube opening, and plenty of capacity for your 6,500 lb camper just like the one you were looking at. It also offers a completely drill free installation and is made right here in the USA.
    view full answer...
  • Class IV Hitch Recommendation for 2008 Dodge Ram 1500 to Replace Class III Curt Hitch
    Sounds like you have the Curt Class III hitch part # 13333 installed on your 2008 Dodge Ram 1500 based on what you described and the fact Curt did not make the OEM hitches for your truck. So for a higher rated hitch that fits your truck we have the Curt Class IV hitch part # 14361 which is a fit and has a much higher towing capacity at 10,000 lbs trailer weight.
    view full answer...
  • Replacing Factory Hitch on a 2006 Dodge Ram 2500 Long Bed with a New Trailer Hitch
    All of our trailer hitches that fit your 2006 Dodge Ram 2500 with a factory hitch, will sit below the factory hitch. Since you are removing your factory hitch, the Curt hitch I recommend is # 14361 as it's 6-1/2 inches from the top of the receiver tube to the bottom of your truck's frame. It's a Class-IV hitch and has a gross trailer weight of 10,000 pounds. See the diagram I created for you. You will want to use that dimension and compare it to where your current hitch sits. I included...
    view full answer...
    Image 1 for
  • Class IV 2014 Ram 2500 Quad Cab with Factory Hitch Recommendation
    The Curt Hitch part # 14361 is designed to fit trucks without the factory hitch. I cannot recommend it for you since your factory hitch is built into the bumper beam which is built differently on the trucks with or without the factory hitch. It hangs lower and more to the rear of the vehicle for trucks with the factory hitch, and the opposite on vehicles without it. Since I cannot recommend you remove the bumper beam the best option is to go with a hitch like the part # 41929 which will...
    view full answer...
  • Curt High Capacity Hitch for 2003 Ram 3500 with OEM Hitch
    For a high-capacity hitch that fits under the OEM hitch, you would use the Curt Class V, part # C15409, which is the only hitch Curt offers that is compatible with the OEM hitch. In order to install this hitch, your truck must have the factory bumper. As you can see in the install instructions, no part of the OEM hitch would to be removed. I have captured a diagram from the instructions that shows how the Curt Hitch would sit in relation to the OEM hitch.
    view full answer...
    Image 1 for
  • Best Trailer Hitch for a 2008 Dodge Ram 1500 SLT 4x4 to Tow a 4,500 Pound Trailer
    Curt trailer hitch # 14361 would certainly do the trick and it does fit your 2008 Dodge Ram 1500 SLT 4x4. But this hitch might be a bit of an overkill since its capacity is 10,000 pound gross trailer weight. It is a great option if you will be towing a heavier trailer in the future. But if you do not anticipate towing any more than the 4,500 pound trailer then I recommend hitch # 13333 which is rated for 6,000 pound gross trailer weight and 600 pounds tongue weight. When used with weight...
    view full answer...
  • Will the Curt Class III Receiver Hitch Fit a 2002 Dodge Ram Pickup with 10-01 Build Date
    The Curt Trailer Hitch for the 2002 Ram, item # 13326, is designed to fit all Dodge Ram 1500 pickups with a build date before 11/02. If the beam on the hitch has mounting holes that are 12-1/2 inches apart you should be able to mount the hitch on your vehicle with no problems. If your Ram is a 2001 or a 2002 with build date after 11/01 you will need a cross frame style hitch like the Curt Class IV Hitch, item # 14361. I have included instructions for each of these hitches for you to...
    view full answer...
    Image 1 for Image 2 for
  • Correct 2003 Dodge Ram 1500 Curt Trailer Hitch Fitment
    The Curt Trailer Hitch Receiver # 14361 will install to the frame of your 2003 Dodge Ram 1500 as long as it was built after 11/01/02.
    view full answer...
  • Recommended Trailer Hitch for a 2003 Dodge Ram 1500
    For your 2003 Dodge Ram 1500, I recommend the Curt Class IV Receiver Hitch part # C14020 if your truck was built before 11/1/02 or part # 14361 if your truck was built after 11/1/02. The white tag on the driver door jamb will tell you the date the truck was manufactured. Neither of the above hitches will require any drilling for installation as they install using pre drilled holes in the frame rail. The spare tire will also remain in place and unaffected by either trailer hitch.
    view full answer...
  • Hitch and TorkLift Camper Tie Downs for 2005 Dodge Ram 2500 Long Bed
    When picking out Torklift camper tie downs you will need to select whether or not you have a factory or aftermarket hitch. The Curt Hitch part # C15409 would qualify as an aftermarket hitch so you would need to go that route. For your truck you would need the part numbers # TLD4101 and # TLD3109 for camper tie downs since you have a 2500, long bed with an aftermarket hitch. The # C15409 is for trucks without the factory hitch so it would not fit below one.
    view full answer...
  • Hitch Applications for a 2003 Dodge Truck
    I would recommend the Curt Class IV Trailer Hitch, item # 14361, for your 2003 Dodge truck. This is a frame mount hitch which will not require you to remove the knockouts in the factory bumper cover and it has a higher towing capacity which will allow for more towing options and greater safety when towing. There are no pitfalls to this hitch that I know of. The Curt Class III Trailer Hitch, item # 13326, is also a good hitch the only downfall is that if the tongue is overloaded the bumper...
    view full answer...
  • Fit of Curt Class IV Hitch 14361 on 2007 Dodge Ram 1500 Regular Cab Shortbed Pickup
    Yes, the 2-inch Class IV Curt hitch # 14361 is a confirmed fit on your 2007 Dodge Ram 1500 regular cab/shortbed pickup. This hitch installs without drilling and all required mounting hardware is included. The instructions and a helpful article are linked to aid your install. If you also need a 4-pole wiring harness you can use kit # C56175 which includes the quick-splice connectors you'll need to splice the harness into your truck's taillight wiring. I linked our main page for 2-inch...
    view full answer...
  • Towing Capacity of a 2004 Dodge Ram Heavy Duty Pickup
    I can not speak for any manufacturers ratings either on your truck or on your OEM hitch. That being said you would need to talk to someone at the Chrysler/Dodge dealer to obtain the actual ratings on your hitch and truck. You should be able to find the tow ratings on your truck in the owners manual or inside the drivers door jamb. Also if you could find out the manufacturer of the hitch on your dodge that would help. Reese and Draw-Tite do extensive in-house testing that insures the hitches...
    view full answer...
  • Will Draw-Tite Class III Bumper Hitch part 75135 Fit my 2002 Dodge Ram Pickup With Roll Pan Bumper
    This hitch will only fit the bumper that originally came with the truck. You would need to use a frame mounted hitch like Draw-Tite part # 41504 or Curt part # 14361 since you have a roll pan.
    view full answer...
  • Hitch Recommendation for a 2005 Dodge Ram 1500 Towing a 7800 lb Trailer
    The Curt Hitch part # 14361 that you referenced would be a great hitch for your 2005 Dodge Ram 1500. I checked with Curt and this hitch will fit your truck as long as it is not a 6 foot bed. If you do have a 6 foot bed you could get the Draw Tite Hitch part # 75420 as this is a similar hitch that would work with a 6 foot bed. Both hitches have enough capacity for your trailer.
    view full answer...
  • Curt Trailer Hitch for a 2007 Dodge Ram Pickup
    The Curt Class IV Hitch, part # 14361 is a fit for your 2007 Dodge Ram Pickup 1500 Long Bed provided you don't have the factory installed tow package on the vehicle. If you do, you'll instead want the Draw-Tite Class IV & V Ultra Frame, part # 41929.
    view full answer...
  • Class 3 or Class 4 Trailer Hitch Receiver for 2007 Dodge Ram 1500 Without Factory Hitch
    Putting a Class III or Class IV trailer hitch on your 2007 Dodge Ram 1500 really depends on how you are going to use it. The Class III etrailer Trailer Hitch Receiver # e98852 or Curt Trailer Hitch Receiver # 13333 is the best option for light towing. They are very simple to put on with zero drilling required and have a 6,000 lb towing and 600 lb tongue weight capacity, which is more than enough for most Ram 1500 models (please refer to your owner's manual for your specific capacity as...
    view full answer...
  • Recommended Trailer Hitch For 2008 Dodge Ram 1500 Quad Cab
    There are a few options for trailer hitches for your 2008 Ram 1500. I recommend the Curt Trailer Hitch, part # 14361. This is a Class lV trailer hitch and it has a 2 inch receiver opening. This hitch is a heavy duty hitch and requires no drilling for installation. For a Class lll hitch I recommend Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75420. This has a 2 inch receiver opening and also requires no drilling for installation. Both of these hitches do have a higher towing...
    view full answer...
  • Will Curt Class III Trailer Hitch C14361 Fit Quad Cab 2004 Dodge Ram
    Yes, the Curt Class III Trailer Hitch # 14361 that you referenced will fit a 2004 Dodge Ram ST or SLT Quad Cab 1500//2500/3500 with the HEMI engine as long as it isn't equipped with the factory hitch. The HEMI Sport is an add-on factory package that features, among other things, different trim at the rear that prevents fitment with this hitch. As long as you don't have this particular package the hitch will work great. The Class III hitch features a 10,000 pound towing weight capacity...
    view full answer...
  • Recommendation for a Trailer Hitch to Fit a 2007 Dodge Ram 1500 Truck
    For your 2007 Dodge Ram 1500, we carry a couple different trailer hitches. The Curt Class III Hitch, # 13333, is a custom-fit hitch that uses a bolt-on mount to connect to your Ram truck. The hitch has a gross towing capacity of 6,000 lbs and a tongue weight rating of 600 lbs. This hitch has a 2 x 2 inch receiver opening. Curt also has a Class IV hitch, # 14361, that has a gross towing weight of 10,000 lbs and a tongue weight of 1,000 lbs. This hitch might be the best option for your...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924