Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 part number: Y00426
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit to create a complete roof rack
Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
Aero-style bars reduce drag to help maintain fuel efficiency
Full-length design maximizes space for carriers and accessories
Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
Works with most universal-mount bike, water, snow, and cargo carriers
Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
Simply push down on the SmartFill strips to slide in accessories - no trimming required
Bottom channels allow for easy installation on Yakima towers
Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
Etched measurements on bottoms of bars help center rack on your roof
Lightweight aluminum bars are durable and rustproof
Internal JetTruss extrusions provide exceptional bar strength
Black powder coat finish is corrosion resistant
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
T-slot dimensions: 7/8" wide x 7/16" tall
T-slot top opening: 7/16"
Underbar slot: Full length
Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
Item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06135
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006135 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06105
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006105 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06135
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06105
Average Customer Rating: 4.8 out of 5 stars (1812 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.1608442
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.1515956
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!549914
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!1218031
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need. I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak. 427427
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation1757391
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!1697363
by: DogDoc04/12/2024
2024 Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.1765846
by: Keith08/24/2021
I have truly enjoyed this system. It allows our family of five plus our dog to stretch out in the car while our gear is secured on the roof. It takes a bit to mount it but I want it secure and it does fine with a roof box at interstate speeds. I absolutely recommend this system.1136082
Keith
8/25/2022
I still use this system every few months with great success. There has been zero damage to the paint of my SUV. The bars, towers, and clips are as secure as ever. I am extremely happy with this equipment.
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Ryan. K05/25/2020
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install. 803293
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.1139343
by: Chad12/07/2018
Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.
As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down. 589149
by: Daryl04/29/2020
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.789770
by: Robert 01/06/2022
The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.
etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.1238568
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.1678878
by: Greg N.11/18/2021
Ford Expedition
I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!1207859
by: SJHughes12/23/2017
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.462341
by: Ryan09/07/2022
Quiet crossbars that look good and do not howl at highway speeds.1397047
Your older Thule Hullavator 897XT will work with the Yakima JetStream crossbars for your 2019 Subaru Outback. The T-slot on the JetStream bars are 1" wide x 1/2" tall, which is actually slightly larger than the T-slot on the AeroBlade bars so you won't have any issues fitting the Hullavator into that T-slot.
As for the length of the bars, I do recommend using the 60" Yakima JetStream Crossbars # Y00426 to ensure you have the needed space to use your Hullavator.
The rest of the parts view full answer...
For your 2021 Jeep Grand Cherokee, I recommend checking out the:
-Yakima JetStream Crossbars # Y00426, with the BaseLine Towers for Yakima Crossbars # Y28TR, and two sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06121.
These crossbars have a maximum weight capacity of 165-lbs, measure 60" long x 3-1/8" wide x 1" tall, and have built-in WindRidges that help control air flow over bars to dramatically reduce wind noise and vibration. view full answer...
For a 2024 Ford Bronco with raised rails I recommend the Yakima JetStream Crossbars # Y00426 along with the TimberLine Towers for Yakima Crossbars # Y33TR. These feet have straps to easily mount on your Bronco's raised rails and will allow you to meet the spread of a lift assist kayak carrier like the Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs # TH898. view full answer...
I can definitely help you out with getting the most parts that will transfer over from your 2016 Honda CR-V!
The Yakima roof rack is the way to go since it uses the longer 60" bars as they should transfer over to your truck cab nicely. The only problem is that the legs used for the naked roof on your CR-V won't be compatible with a track system so you will need to get new legs and a different fit kit for the tracks on your truck. A lot of truck camper shells do come with a track system view full answer...
The Yakima JetStream Roof Rack will work well on your 2012 F-150 SuperCrew. This roof rack includes the JetStream crossbars # Y00426, BaseLine towers # Y28TR, and fit kit # Y06168 designed for your F-150. To help cut down on the wind noise I recommend a fairing like part # Y05018. This attached to the front crossbar and has rubber bumpers that protect the truck finish.
To secure the canoe to the crossbars I recommend the Thule Portage Canoe Carrier, part # TH819. This system attaches view full answer...
For your 2020 Honda Pilot with a naked roof the roof rack we have with the longest crossbars is the Yakima Jetstream rack part # Y00426, # Y28TR, and # Y06152. This gives aerodynamically shaped bars that are 60 inches length which will work really great on your 2020 Honda Pilot.
I attached a picture of what this looks like installed as well as an install video as well. view full answer...
Rhino Rack has a roof rack that is a fit for your 2021 Jeep Grand Cherokee that has the matte black roof rails that run front to back with the part numbers # RRVA137B-2, # RRRLKVA, and # DK234. This is one of the nicest and quietest roof racks out there so it will work really well for you. view full answer...
To add a set of Yakima Jetstream crossbars to the bare roof of your 2023 Acura MDX you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
This aero bar roof rack system has a 165 lbs capacity. view full answer...
I recommend using the Yakima JetStream Crossbars # Y00426 with their Towers # Y33TR on your 4-door 2023 Ford Bronco. This rack uses aero crossbars which feature an integrated t-track for adding accessories. The Yakima Same Key System (SKS) Lock Cores # Y07208 will provide you with 8 lock cores which you can use on the towers and other Yakima compatible roof accessories. These will allow you to secure the rack and your gear to the roof rack. view full answer...
To add a roof rack to the naked roof on your 2022 Ford Maverick, I recommend the roof rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06180
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 view full answer...
The Yakima Jetstream roof rack part numbers # Y00426 and # Y00147 that fits your 2004 Toyota 4Runner would do a great job carrying the Yakima Showdown part # Y04081.
The Jetstream is very aerodynamic which helps with wind noise, is easy to install, and is one of the highest quality roof racks out there so you'll be very happy with it. view full answer...
For your 2019 VW Atlas with raised side rails I highly recommend going with an option from Yakima, which consists of the Yakima Jetstream Crossbars # Y00426 and TimberLine Towers for Yakima Crossbars # Y33TR.
This will give you a roof rack which not only looks great but uses aero bars with ridges that helps give you a very quiet ride. The bars are 60" long to fit the width of your Atlas and have T-slots which will allow you to use channel-mounting accessories.
I also recommend using view full answer...
We do have some roof rack solutions for your 2021 Jeep Grand Cherokee with the matte black flush rails. They mount via clamps in the door jamb (just as if you didn't have any rails) so if you're wanting a roof rack that mounts directly to those rails you will need to swap it out for something different.
The clamp mounting is perfectly safe so I personally wouldn't change out the rails. For your current setup I recommend picking up the Yakima JetStream system which includes the following:
view full answer...
The dimensions of the T-slot are consistent between Thule, Yakima, Rhino Rack, Inno, Malone and most of the other major players. Your Thule accessories that are designed to mount in the slot or channel in the top of the crossbar will indeed be compatible with the Yakima 60 inch # Y00426 crossbars. Yakima confirms that the 60 inch crossbar along with the # Y33TR TimberLine towers will indeed work on your 2012 Toyota 4Runner Trail.
I've linked you to our Roof Rack help articles. view full answer...
So what you can do is install tracks on the top of your 2014 Dodge Grand Caravan and then install the roof rack system in those tracks. You'll need to measure to find the right length of tracks, as well as the correct crossbar width, but here's exactly what you'll need:
- Yakima Tracks for Roof Racks - 42" Long # Y01126, 54" Long # Y01127, or 60" Long # Y01135
- Landing Pad 1 # Y00221 (You'll need to order Qty 2 of this part number)
- SkyLine Towers for Yakima Crossbars # Y53TR
- view full answer...
For your 2005 Jeep Grand Cherokee using the Yakima JetStream Crossbars # Y00426 and the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR I recommend going with the Malone MegaWing Fishing Kayak Roof Rack w/ Tie-Downs # MPG207.
Reason being, the MegaWing has a larger weight capacity at 150-lbs compared to the 75-lbs max of the SeaWing # MPG107MD, is only a half a pound heavier, and has a longer load strap at 15' compared to the SeaWing's 11' straps.
The positioning view full answer...
Yakima replaced the Whispbar roof rack line with their JetStream rack line which for your 2019 Volvo XC90 you'd need the # Y00426 and # Y33TR.
Since all of the Whispbar line has been discontinued there isn't a way to get replacement parts for it. view full answer...
I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162.
The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked view full answer...
There is a solution for you that will allow you to still use Yakima round bars, if you have them. Unfortunately, since the Q-Towers have been discontinued and the new system is not backwards compatible, you will need new towers, a fit kit, and round bar adapters. This is what you need for your 2017 Chevrolet Colorado.
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part view full answer...
The Yakima roof rack you looked at, consisting of the JetStream # Y00426 60 inch crossbars, # Y28TR BaseLine Towers, # Y06102 and # Y06139 clip kits is compatible with your 2016 Ford Edge with the glass roof, according to Yakima. The feet will sit on the painted portion of the roof, not the glass so this is perfectly safe to use.
If you let me know what you're needing to use the roof rack for I can make some recommendations for you! view full answer...
I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof.
For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y28TR and you'd be set. view full answer...
The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189.
This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty view full answer...
Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180.
The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR. view full answer...
I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle.
However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR with RoundBar adapter # Y03536. You can use the view full answer...
We do have a roof rack to fit your 2017 GMC Terrain with a naked roof. I suggest the Aerobars for better aerodynamics and less noise. For this system, I recommend the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425, the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR, the RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06146.
This will give you a complete view full answer...
The Q clips you'd need are no longer available from the manufacturer. To utilize your Yakima bars you would need to upgrade the rack with the following:
Round Bar Adapter # Y03536
BaseLine towers # Y28TR
BaseClip # Y06195 and # Y06196 view full answer...
The best-looking roof rack for your 2013 Lexus ES 350 is from Yakima and you can choose the color of crossbars you want, either black or silver. The rack consists of the following parts but please be aware there are no roof racks that fit your Lexus if it has a glass roof:
- Yakima JetStream Crossbars # Y00425 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06175
- BaseClip Fit Kit # Y06160
And for a wind fairing a good fit for this rack on your Lexus view full answer...
I have a kit that would be perfect for your set up. I would get the BaseLine Towers # Y28TR and BaseClip Fit Kit # Y06152 to get the feet attached to your roof. Then you will need the RoundBar SL Adapter # Y03536 to get your round Yakima Roof Bars secured to your roof rack foot packs.
This kit will look and work the best on the roof of your 2021 Honda Passport since you already have round Yakima roof bars. view full answer...
For your 2015 Volkswagen Golf TDI with a Yakima BaseLine tower roof rack installed you can use their lock core kit # Y07204. This set includes 4 lock cores, two standard keys and the control key you will use to install the cores in your BaseLine towers # Y28TR.
Please refer to the two linked videos for more on this kit and how to install it. view full answer...
We do! The lock kit you need for the Yakima BaseLine Towers # Y28TR can be found on our site as part # Y07204. This kit comes with 4 matching lock cores, 2 keys, and the change key needed to remove and install the cores. view full answer...
Yakima phased out the Q-Tower style roof racks so while we can help you reuse the round crossbars you have we don't have a fit kit for the towers you have now to fit your 2012 Toyota Prius. Instead the part numbers you need are # Y28TR, # Y03536, and # Y06117 to use with your round bars # Y00409. view full answer...
For your 2010 Ford Fusion, I recommend starting with the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars - Aluminum - Black # RR69YR which is a custom fit for your vehicle. Then I recommend using the Rhino-Rack J-Style Kayak Carrier - Folding - Universal Mount # S512 along with the Expansion Arm for Rhino-Rack J-Style Kayak Carrier # RRS512X giving you a secure fit for 2 kayaks on your small roof.
An alternative option is the Inno Kayak Carrier w/ Tie-Downs - J-Style view full answer...
Yakima does not utilize the Q Clips and Towers for the 2016 Toyota Prius Prime.
Instead, they utilize the BaseClips, part # Y06169 and # Y06123, for the BaseLine Towers, part # Y28TR.
You can see a combination of these parts with some JetStream Crossbars, part # Y00425, at the link below. If you already have Yakima crossbars, then the is no worry as the BaseLine Towers are designed to work with Yakima's entire range of crossbars. view full answer...
Yakima Baseline Towers # Y28TR comes with a total of 4 towers.
If you are looking for a complete crossbar system that includes the Yakima Baseline towers, I would be happy to assist you if you confirm your year/make/model of vehicle.
view full answer...
In order to use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with bare roof you'll need the following:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part # Y28TR
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 part # Y03536
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06153
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06132
view full answer...
The best roof rack for your 2020 Ford Escape is from Yakima because it will give your Escape a roof rack that is strong (165 lb weight capacity), durable (all parts have a lifetime warranty), quiet and looks sleek.
The roof rack for your '20 Escape is made up of:
- Yakima JetStream Crossbars # Y00426 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima Roof Rack # Y06137 and # Y06152
- Same Key System Lock Cores (Optional) # Y07204
The aero shape view full answer...
Since the Baseline Towers # Y28TR are only designed to be used on vehicles with a naked roof you are going to have to switch to the RidgeLine Towers # Y00145 to fit the flush rails on your 2018 BMW X5M. You will also need to get the RidgeClip kit #10 from Yakima as we no longer carry these clips.
I do see your roof will allow for either the 60" # Y00426 or 70" # Y00427 Jetstream crossbars. view full answer...
The fit kit part # Y06135 only includes two clamps which means it's enough to install one crossbar. To install two crossbars you'd need to order a quantity of two. view full answer...
If you are just needing the Yakima BaseClip Fit Kit for your 2014 Dodge Ram 1500, you can use part # Y06135.
If your 1500 is the Quad Cab, the rest of the roof rack assembly will include # Y00422 for the two 60 inch crossbars and # Y28TR for the BaseLine Towers. I have attached an installation video for you to check out.
view full answer...
For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124.
The clips won't scratch the paint either. view full answer...
Yes! I confirmed with Yakima that the # Y00426, # Y28TR, and 2 sets of the # Y06135 fit your new body style 2019 Ram 1500 Crew Cab. To add theft-deterrence to your roof rack, I recommend using the Same-Key Locks # Y07204. view full answer...
Sometimes we are able to find older Yakima fit info but I checked and they do not have a Q clip setup for the 2013 Toyota Prius c so the only option we have would be a new rack that would allow you to use your round bars. The complete rack for your vehicle consists of:
BaseLine Towers for Yakima Crossbars # Y00146
BaseClip Fit Kit # Y06135
BaseClip Fit Kit # Y06179
Round Bar Adapter # Y03536
view full answer...
The 2012 Ford Focus sedan and hatchback use the same Yakima base roof rack. The parts are:
Round 58 Inch CrossBars (2) part # Y00409
BaseLine Towers part # Y28TR
RoundBar Adapters # Y03536
BaseClips # Y06135 and # Y06105 view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Keith
8/25/2022
I still use this system every few months with great success. There has been zero damage to the paint of my SUV. The bars, towers, and clips are as secure as ever. I am extremely happy with this equipment.