2027 Mercedes-Benz E-Class Lamp Guards

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

Hey David, congrats on the new truck! I've got another option but the DeeZee item #DZ36GJ isn't going to work with a spray-in bed liner. The textured surface of the spray-ins causes the mat to slide around and moisture, along with debris gets…

Hey Troy! I went ahead and attached the installation instructions for the #TS64ZR as pictures below. You will have to lower the underbody panel, lower the exhaust, and remove/drill holes in the heat shield for installation. Most of the hitches for…

Hi Craig! The Replacement Shroud for Dometic Brisk RV Air Conditioner - Polar White #DMC27BQ is not the correct replacement shroud for you Brisk II air conditioner. Instead, you should use Replacement RV Air Conditioner Cover for Dometic Brisk Air II…

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Michael. I do not have a wiring diagram for a 2026 Crown Signia so I can not identify those wires. Your SUV does indeed have PWM system for the LED lights. To install the Curt Powered Tail Light Converter item #C59236, you'll need to use a…

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

In order to cover the pucks on a 2015 Ford F-350 you can use the Replacement Puck Plug Covers part #58199. In order to cover the hitch ball hole on a 2015 Ford F-350 you can use the Rubber Hole Cover part #RP30136.

Reese manufactures the OEM 5th wheel/gooseneck hitch for Ford, so the Reese #RP30136 you had looked at is the correct cove for your Ford OEM gooseneck hitch. For the OEM 5th wheel pucks, you'd use the Reese #58199. I've confirmed this with my…

The Reese gooseneck ball hole cover part #RP30136 that you referenced is the correct replacement for the ball hole cover of your 2016 Ford F-350 that has the OEM rail kit.

Yes, the correct plugs/covers for the factory prep package on a Ford Super Duty is going to be the Rubber Hole Cover for Reese Elite Series Under-Bed Gooseneck Trailer Hitch part #RP30136 for the hitch ball hole and the Replacement Puck Plug Covers…