Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
2500 Pound Tongue Weight
20000 Pound Towing
Trailer Wiring:
With tow package use 118384 for wiring
Features:
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled to accept camper tie-downs.
Installation Notes:
No drilling through vehicle frame required for installation.
Modification of the spare tire hanger may be necessary for hitch installation
Hitch is designed to fit models with a factory hitch and has only one receiver opening
Modification of the spare tire hanger is required on Short Bed models
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
2500 Pound Tongue Weight
20000 Pound Towing
Trailer Wiring:
With tow package use 118384 for wiring
Features:
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled to accept camper tie-downs.
Installation Notes:
No drilling through vehicle frame required for installation.
Modification of the spare tire hanger may be necessary for hitch installation
Hitch is designed to fit models with a factory hitch and has only one receiver opening
Modification of the spare tire hanger is required on Short Bed models
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1000 Pound Tongue Weight
10000 Pound Towing
Weight Distribution Towing Capacity:
1200 Pound Tongue Weight
12000 Pound Towing
Trailer Wiring:
With tow package use C55384 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1000 Pound Tongue Weight
10000 Pound Towing
Weight Distribution Towing Capacity:
1200 Pound Tongue Weight
12000 Pound Towing
Trailer Wiring:
With tow package use C55384 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
More Information >Trailer Hitch Size:
2-1/2 Inch Hitch Opening
Towing Capacity:
2700 Pound Tongue Weight
20000 Pound Towing
Weight Distribution Towing Capacity:
2700 Pound Tongue Weight
20000 Pound Towing
Trailer Wiring:
With tow package use C55384 for wiring
Features:
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
More Information >Trailer Hitch Size:
2-1/2 Inch Hitch Opening
Towing Capacity:
2700 Pound Tongue Weight
20000 Pound Towing
Weight Distribution Towing Capacity:
2700 Pound Tongue Weight
20000 Pound Towing
Trailer Wiring:
With tow package use C55384 for wiring
Features:
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
600 Pound Tongue Weight
6000 Pound Towing
Weight Distribution Towing Capacity:
1000 Pound Tongue Weight
10000 Pound Towing
Trailer Wiring:
With tow package use C55384 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
600 Pound Tongue Weight
6000 Pound Towing
Weight Distribution Towing Capacity:
1000 Pound Tongue Weight
10000 Pound Towing
Trailer Wiring:
With tow package use C55384 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Trailer Wiring:
With tow package use 118384 for wiring
Features:
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
Your vehicle might not have all the bolt mounting holes, so you may have to drill new holes where the bolts go.
You’ll need to lower your spare tire so there’s room to install the hitch.
You’ll need the original, factory-installed rear bumper for this hitch to fit correctly.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Trailer Wiring:
With tow package use 118384 for wiring
Features:
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
Your vehicle might not have all the bolt mounting holes, so you may have to drill new holes where the bolts go.
You’ll need to lower your spare tire so there’s room to install the hitch.
You’ll need the original, factory-installed rear bumper for this hitch to fit correctly.
More Information >Trailer Hitch Size:
2-1/2 Inch Hitch Opening
Towing Capacity:
3000 Pound Tongue Weight
20000 Pound Towing
Weight Distribution Towing Capacity:
3000 Pound Tongue Weight
20000 Pound Towing
Trailer Wiring:
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Textured black powder coat over e-coat shields against rust and corrosion.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Trailer Wiring:
With tow package use 118384 for wiring
Features:
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
Your vehicle might not have all the bolt mounting holes, so you may have to drill new holes where the bolts go.
You’ll need to lower your spare tire so there’s room to install the hitch.
You’ll need the original, factory-installed rear bumper for this hitch to fit correctly.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Trailer Wiring:
With tow package use 118384 for wiring
Features:
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
Installation Notes:
This hitch bolts right on, so you wont have to drill into your vehicle.
Your vehicle might not have all the bolt mounting holes, so you may have to drill new holes where the bolts go.
You’ll need to lower your spare tire so there’s room to install the hitch.
You’ll need the original, factory-installed rear bumper for this hitch to fit correctly.
More Information >
Filters
