2020 Jeep Wrangler Trailer Hitch

Features:

This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.

Installation Notes:

No drilling through vehicle frame required for installation

Access holes may need to be enlarged by filing or rotary tool

Exhaust must be temporarily lowered for installation

Any obstructions on the cross member, such as excess welding, will need to be removed for installation

Tech Tip:

Hitch receiver tube is longer than the other etrailer hitches and will extend farther out from the vehicle so accessories such as bike racks and cargo carriers extend past the spare tire.

Features:

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Powder coated steel is sturdy and corrosion resistant.

Installation Notes:

No drilling through vehicle frame required for installation

Access holes may need to be enlarged by filing or rotary tool

Exhaust must be temporarily lowered for installation

Any obstructions on the cross member, such as excess welding, will need to be removed for installation

Tech Tip:

Hitch receiver tube is longer than the other Curt hitches and will extend farther out from the vehicle so accessories such as bike racks and cargo carriers extend past the spare tire.

Features:

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

Installation Notes:

No drilling through vehicle frame required for installation

Exhaust must be temporarily lowered for installation

Tow hooks, if present, will be permanently removed

Any obstructions on the cross member, such as excess welding, will need to be removed for installation

Tech Tip:

Hitch will fit models with Mopar Off Road Bumper #82213654.

Features:

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

Installation Notes:

No drilling through vehicle frame required for installation

Exhaust must be temporarily lowered for installation

Tow hooks, if present, will be permanently removed

Any obstructions on the cross member, such as excess welding, will need to be removed for installation

Tech Tip:

Hitch will fit models with Mopar Off Road Bumper #82213654.

Features:

This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 6" Long receiver sits beneath your bumper so it's out of the way when accessing cargo. Powder coated steel is sturdy and corrosion resistant.

Installation Notes:

No drilling through vehicle frame required for installation

Exhaust must be temporarily lowered for installation

Any obstructions on the cross member, such as excess welding, will need to be removed for installation

Tech Tip:

Hitch receiver tube sits beneath rear bumper to remain out of the way when accessing the cargo area of the vehicle.

Features:

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Receiver sits beneath your bumper so it's out of the way when accessing cargo. Powder coated steel is sturdy and corrosion resistant.

Installation Notes:

No drilling through vehicle frame required for installation

Access holes may need to be enlarged by filing or rotary tool

Exhaust must be temporarily lowered for installation

Any obstructions on the cross member, such as excess welding, will need to be removed for installation

Tech Tip:

Hitch receiver tube will extend farther out from the vehicle so accessories such as bike racks and cargo carriers extend past the spare tire.

Features:

This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. Receiver sits beneath your bumper so it's out of the way when accessing cargo. Powder coated steel is sturdy and corrosion resistant.

Installation Notes:

No drilling through vehicle frame required for installation

Features:

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Textured black powder coat over e-coat shields against rust and corrosion. Mounting bracket for wiring is welded on for a clean look.

Installation Notes:

No drilling through vehicle frame required for installation

Access holes may need to be enlarged by filing or rotary tool

Exhaust must be temporarily lowered for installation

Any obstructions on the cross member, such as excess welding, will need to be removed for installation