Trailer Hitch Size:
2-1/2 Inch Hitch Opening
Towing Capacity:
2000 Pound Tongue Weight
18000 Pound Towing
Weight Distribution Towing Capacity:
2500 Pound Tongue Weight
18000 Pound Towing
Trailer Wiring:
Features:
Perfect for heavy-duty applications, this vehicle trailer hitch receiver is strong, durable and corrosion resistant. Fully welded steel features a black powder coat finish on top of an e-coat base. Ball mount, pin and clip sold separately.
Installation Notes:
No drilling required for installation
If equipped with a factory hitch, the factory hitch will need to be removed to install this hitch
Hitch will fit with full size spare tire stowed under vehicle
Fits all models with standard bumper
Tech Tip:
Product not intended for models with Heavy Duty Suspension. Installation requires removal and relocation of factory electrical bracket and vibration damper, if equipped.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
900 Pound Tongue Weight
6000 Pound Towing
Weight Distribution Towing Capacity:
1000 Pound Tongue Weight
10000 Pound Towing
Trailer Wiring:
Features:
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation Notes:
No drilling required for installation
Spare tire will need to be lowered or removed temporarily for hitch installation
Spare tire repositioning and/or modification of spare tire carrier may be required
Tech Tip:
20" spare tire will not be able to be stored in the original location underneath the vehicle.
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...Filter Products (4)
Contact and Help
What our customers are saying:
Thanks for the quick service. Shipment was recived OK. Trailer hitch was easy to install. Looks good. Ed
Ed
Gilberts, SC