Expert Review Video:
Code: TLC1205-30
Trailer Hitch Size:
2-1/2 Inch Hitch Opening
Towing Capacity:
2500 Pound Tongue Weight
20000 Pound Towing
Weight Distribution Towing Capacity:
3000 Pound Tongue Weight
30000 Pound Towing
Trailer Wiring:
2003 GMC Sierra Trailer Wiring
With tow package use 118384 for wiring
Features:
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled to accept camper tie-downs.
Installation Notes:
No drilling required for installation
Spare tire will need to be lowered or removed temporarily for hitch installation
Factory hitch must be permanently removed for hitch installation
Hitch is designed to fit Long Bed models
More Information >Code: TLC1205-30
Trailer Hitch Size:
2-1/2 Inch Hitch Opening
Towing Capacity:
2500 Pound Tongue Weight
20000 Pound Towing
Weight Distribution Towing Capacity:
3000 Pound Tongue Weight
30000 Pound Towing
Trailer Wiring:
2003 GMC Sierra Trailer Wiring
With tow package use 118384 for wiring
Features:
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled to accept camper tie-downs.
Installation Notes:
No drilling required for installation
Spare tire will need to be lowered or removed temporarily for hitch installation
Factory hitch must be permanently removed for hitch installation
Hitch is designed to fit Long Bed models
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...I&…
view full answer...Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846.…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly -…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Filter Products (4)
Contact and Help
What our customers are saying:
That was the best service that one could expect. Thanx so much...hitch went on perfect...thanx again, Randy
Randy
Stow, OH