Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
Hey Therese, I would go with a frost plug style part #ZE62FR for your 2018 Toyota RAV4 hybridas it has direct contact with the coolant in the engine which will heat up the engine quicker and also more uniform since the coolant spreads throughout the…
Hi Pete; all you need to do is put NSCG silicone grease G-624 on the #KH11813 cartridge. This block heater doesn't need any gasket maker, and you definitely do not want to apply it to the heating element. The clip will lock it in place so gasket…
Hi Hilario, congrats on the new truck! ^___^ If this were my truck and I was installing a retractable cover on it (which I actually did with my Silverado), I would go with the manual RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte…
It sounds like you are wondering if the Kat's Heaters Custom Fit Engine Block Heater #KH11811 features a temperature control. Please let me know if you are looking for something else. This engine block heater does have an internal thermostat that…
Hey Terry, we can confirm that the Kat's cartridge heater part #KH11811 does fit your 2023 Chevy Traverse. Since it installs in a cartridge the antifreeze fit tip does not apply like you mentioned. The cavity on the engine block to use is the RL…
Hello Ted! The Kat's Heaters Custom Fit Engine Block Heater item #KH11811 is the correct one for a 2022 GMC Canyon AT4 with a 3.6L V6 engine. According to Kat's, the block heater will need to be installed on the rear right side of the engine…
Hey Stan, with the heaters like the #KH11465 Kat's does recommend coating the o-ring with NSCG silicone grease G-624. We have white lithiuim grease that would work great for this with part number #L11354.
Hey George, according to Kat's Heaters, their #KH11815 cartridge style engine block heater installs into the core hole on the right side of the engine block toward the front of the motor on your 2013 Ford F-150 with the 3.5 liter ecoboost engine.…
I checked with Kat's and the correct location to install the Kat's Heaters Custom Fit Engine Block Heater part #KH11811 on a 2014 Chevrolet Impala Limited with 3.6L V6 Engine is on the rear left side of the engine as you can see in the…
Based on information I could find for the Kat's Heaters Custom Fit Engine Block Heater #KH11811 I see most people mention they see the engine temperature reach around 40-50 degrees Fahrenheit. So it appears this is the range the heater will turn…
