I spoke with DeeZee and they gave me the following dimensions, pictured below, for the DeeZee Aluminum Headache Rack with Sliding Load Stops #DZ95050RB. If your Weatherguard Crossbed Storage Toolbox measures 63"-71" in length then you will…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Hey Brian! For 7-way wiring to go with your Curt #C15325 the best option is the #20023. This is only a 7-way so you can either use an adapter like #PK12716 or swap out the connector for one that fits a USCAR connection like the Curt Dual Connection…
Hi William! For the best sliding hitches that will fit that puck system in your 2023 GMC Sierra 3500 short bed, you are going to want to check out the following two American made options: B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC…
Hey George, the Westin HDX grille guard part #W45PF will block your sensors on the front of your 2025 Ford F-150 but it would not block a front facing camera if you had one.
Hi Brandon! For the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long #DX45QR, you will want the Bronze Spring Eye Bushing, 3/4" x 1" x 2-1/2" #14-67. This is a direct replacement for what came in…
Hey Ryan, the Curt CrossWing Lightweight 5th Wheel Trailer Hitch part #C86JR is compatible with the Adapter Rails for Curt 5th Wheel Hitch part #C88KR. The fifth wheel hitch simply drops into the adapter and secures with hitch pins and then the…
Bruce, the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles #DX65QR is not the same as the Dexter 072-080-01, so yes the specs are correct. The spring you're referencing is the Dexter 5-Leaf Slipper Spring w/ Flat End for…
The B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights is only available is white part #BWPUCP7520WA or black part #BWPUCP7520BA. B&W does not produce this ladder rack with a chrome or stainless finish.
Hey William, We have a great option for a rear anti sway bar for your 2024 Ram 3500. Both the 2 wheel and 4 wheel drive models use the same anti sway bar so I recommend the Roadmaster #RM73FR. I will add with these since the Ram's do not come…
Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…
Hello Levan, thanks for reaching out. Yes, the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND is made to replace the Lippert 1621 pin box so the bolt hole spacing and dimensions are the same. Your cab and tailgate clearance will be…
