Vehicle Style: 6-1/2 Foot Bed Change
Gooseneck Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
More Information >Gooseneck Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
More Information >Videos
for Gooseneck Hitch
Help Articles
for Gooseneck Hitch
Expert Answers
for Gooseneck Hitch
The OEM prep package consists of 4…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going…
view full answer...Hi Rick, The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #GY86GR could potentially work but you'll need the correct gooseneck to fifth…
view full answer...Installation of both the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1394 for your 2002 Ram 2500 and #BWGNRK1308 for your 2009…
view full answer...None of the options for the prep package are specifically designed to add height. Depending on the ball you have now you might be able to get a little more height out of the…
view full answer...To add a gooseneck hitch to your 2024 Ford F-350, I recommend the B&W Turnoverball Underbed Gooseneck Hitch item #BW73FR. This hitch is…
view full answer...Yes, we do! It is Curt Custom Underbed OEM-Style Gooseneck Hitch item #C60633. This gooseneck hitch is confirmed to fit both the 6-1/2' and…
view full answer...Yes we do have a B and W Turnoverball gooseneck hitch that fits your 2024 Ford F-350 with the #BW73FR.
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Hey Gabriel, You would need a factory wire harness from Dodge first and could then install the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-33-32 inline with the factory harness to get a 7-way socket in the bed of the truck as…
view full answer...The factory prep package on a 2018 Ram 3500 is pretty apparent so odds are you don't have this if you are unsure. If the indentations for the…
view full answer...A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W…
view full answer...Filter Products (4)
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN