Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey, Mark! That’s a great question! I took a look at the Maxxis tire and wheel combo, part #MXS67FR, and they measure 27" in diameter. We size our tire covers based on the actual tire size, not the cover itself. The etrailer tire cover, part…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
Hi Chris! I would be shocked if the wheels have a 5 on 5 bolt pattern. I don't think I have ever seen a 12" wheel with that bolt pattern. They will typically have a 5 on 4-1/2 bolt pattern and I would encourage you to have him look at the…
Hello Eric, The #K2R35DKG is Dacromet-coated, and the calipers are treated with KodaGuard. The #K2R35DS, on the other hand, is made entirely of stainless steel, hence the higher price. If you're in an area where road salt is common or if…
I recommend mounting the Low Profile LED Flood Light #OPT64FR on the upper frame of your trailer. This light is 2" tall and will broadcast the light down at a 45 degree angle. The housings are made of aluminum to help protect the light from…
I have attached a photo for you that shows how a 7-way trailer connector is wired. If you take a look at the trailer side trailer connector you will see a terminal labeled "12V Power". If you were to run a wire part #10-1-1 (per foot) from…
I can definitely understand your frustration as the Fulton F2 Swing-Up Trailer Jack with Dual 7" Wheels, Sidewind -1,600 lbs F1413100334 is not a cheap jack so it would be nice to replace the plastic housing part number 9 in the included diagram…
The DeeZee Specialty Series Trailer Tongue Tool Box item #DZ91716 measures 34" long in the back, 16" long in front, 14-1/4" wide and 18" tall. The lid measures 36" long in the back, is 15" wide, and adds 1" to the…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA
Illuminate Your Space with Incandescent Rectangle Work Lights
Discover the versatility of incandescent rectangle work lights. Perfect for interior applications, these lights offer a warm glow ideal for dim environments. While not suited for exterior use due to lack of gasketing, they can be upgraded with LED bulbs for brighter illumination.
Incandescent rectangle work lights provide a warm, soft light that's perfect for indoor settings where you need illumination without harsh glare. They're great for areas where a subtle light is needed, and you can easily swap the bulb for an LED if you need more brightness.
These lights are not ideal for outdoor use as they lack gasketing to protect against water. They're best used indoors or in covered areas where moisture isn't a concern. For outdoor applications, consider adding a protective cover or opting for a different light type.
Installation is straightforward and user-friendly. Many find the process simple, with the lights fitting well into existing setups. However, some adjustments might be needed if replacing older models, especially if the previous lights were of a different size or standard.
Yes, you can increase the brightness by replacing the incandescent bulb with an LED equivalent. This not only boosts the light output but also improves energy efficiency, making it a practical upgrade for those needing more illumination.
Consider the environment where you'll use them. They're perfect for indoor or covered spaces. Check the size compatibility if replacing existing lights, and think about upgrading to LED bulbs for more brightness and efficiency. Their sturdy build ensures durability in various settings.
Filters
