radiator fans

Filter by Product Size

Ford Ranger

4 Inch Diameter
$121.26 - $121.26

5 Inch Diameter
$121.26 - $125.68

6-1/2 Inch Diameter
$134.99 - $134.99

8 Inch Diameter
$65.78 - $122.42

8-5/8 Inch Diameter
$440.14 - $440.14

9 Inch Diameter
$63.51 - $122.42

10 Inch Diameter
$60.36 - $172.59

11 Inch Diameter
$211.67 - $512.22

12 Inch Diameter
$71.14 - $615.60

12-1/8 Inch Diameter
$242.21 - $636.10

13 Inch Diameter
$77.78 - $224.89

13-1/2 Inch Diameter
$570.22 - $732.53

14 Inch Diameter
$49.44 - $716.61

15 Inch Diameter
$50.43 - $1,219.38

16 Inch Diameter
$49.06 - $260.38

17 Inch Diameter
$47.71 - $730.94

18 Inch Diameter
$48.89 - $113.53

19 Inch Diameter
$76.59 - $108.19

20 Inch Diameter
$76.43 - $82.56

22-1/2 Inch Diameter
$567.20 - $792.97

23-3/4 Inch Diameter
$559.64 - $917.27

24 Inch Diameter
$559.64 - $917.27

25 Inch Diameter
$419.72 - $419.72

25-5/8 Inch Diameter
$974.60 - $974.60

26 Inch Diameter
$587.61 - $974.60

26-3/8 Inch Diameter
$974.60 - $974.60

27 Inch Diameter
$615.60 - $974.60

28 Inch Diameter
$314.80 - $314.80

28-1/4 Inch Diameter
$974.60 - $974.60

29 Inch Diameter
$429.96 - $429.96

32 Inch Diameter
$412.91 - $429.96

Filters

5500 CFM

6000 CFM

6800 CFM

6200 CFM

12 Inch Diameter

Radiator Fans for tight bays and heavy loads

Working with limited space or extra heat from towing? High-flow radiator fans include thin, low-profile choices that slide into tight clearances, and reversible setups you can run as a puller or pusher on a condenser with push-through mounts when the fins accept them. For demanding towing or big power, using an electric fan as an auxiliary while keeping the mechanical fan can be the smart move.

For heavy loads and hot conditions, an electric fan alone may not keep temps where you want them. A common approach is to keep the mechanical fan and add an electric unit as an auxiliary. If you delete the clutch fan, watch for hotter temps and A/C performance changes. Check the fan's intended use—some are not designed to be a stand-alone solution.

Yes, reversible electric fans can be set up as a pusher or puller. If using plastic push nuts through the fins, make sure the fins have enough space and are pliable enough to accept them, and confirm there's room for the fan's dimensions. Verify blade orientation and wiring polarity so airflow goes the direction you want.

Measure from the water pump pulley or accessories to the radiator or condenser, then compare to the fan's overall thickness, including any shroud. Low-profile, high-flow options exist for tight spaces, but some fans are thicker than most, so verify room before ordering. Aim for a comfortable clearance gap once mounted.

Plan wire length to reach switches, relays, and power without strain, and include the fuse value called out in the instructions, such as a 25 amp fuse. Confirm the rotation arrow and that the fan is oriented to pull or push as intended. After mounting, spin-check the blades and verify clearance from pulleys and belts before powering up.

Trailer Brakes

Trailer Tires and Wheels

Trailer Hubs and Drums

Related Parts