gas can - Risk Racing

Hey Jon, I have a solution for you but I would not recommend the Andersen Weight Distribution system part #AN33VR for your 2025 Brinkley Z Air 297. What we have found is that the Andersen system does a decent job with lighter weight trailers but for…

Thanks for reaching out Greg, we get this question from time to time. At this time, we don’t offer any tire and wheel packages in a 5 on 4.25" bolt pattern. The main reason is this bolt pattern's typically is found on a passenger vehicle…

That's what we aim to do for you Lori, make things easiest as possible. The Connect-Ease Quik Dual 12V Parallel Battery Connector #CE86RR is simple and easy to setup. This connector will increase your overall battery capacity by adding a second…

Hi Eric! The Dylux RV Tankless Water Heater #DY54FR does have auto frost protection, which activates when the temperature drops below close to freezing temps. That’s a helpful feature for chilly nights while the RV is in use. I would not treat that…

Hey Eric, thanks for reaching out! Ultimately, I'll need more specific info on your trailer (the GVWR would be best), but I can still help you figure out how to choose a weight distribution hitch (WDH). What you'll need to look for is the max…

Hey Greg! The etrailer Anti-Rattle Hitch Collar for 2.5" Hitch Receivers #e55YV is not compatible with a weight distribution hitch. This is really the only restriction for our anti-rattle. If you need an anti-rattle for a weight distribution…

Hello Greg, thanks for reaching out. Yes, the EcoHitch Front Mount Trailer Hitch Receiver #EH99CR will indeed fit your 2023 Tiffin Wayfarer/Mercedes-Benz Sprinter 3500. You will need to temporarily remove the grille during installation, and the front…

Hey Jason, the install of the EcoHitch Front Mount Trailer Hitch Receiver #EH99CR does not affect the front sensors or cruise control. What will you be using the front hitch for?

Normally the SAE number isn't a reliable way to pick out replacement lenses, but we know that the #A32RB is the correct replacement for a lens marked SAE-A-P2-DOT-02 like what you have. For an all new assembly you'd want the part #MC32RB.

I spoke to TRC and the gap/channel in the J-Channel Trim #362416-955 will measure 0.154" (diagram included). Though we have not done any installs with this as of yet, so no pictorial examples, there will be absolutely no issues with the…

I spoke with my contact at Curt and he said that from the center of the hitch pin hole to the nearest part of the step platform on #C31001 is 5-1/4 inches. So from the center of the pin hole out all the way to the end of the step would be 11-5/8…

Thank you for the photos; based on what you showed, you would want oval LED lights that are in the 6-1/2" x 2" range, though you would need exact dimensions to ensure the right fit. For example, #STL72RB is a red oval light that measures…