Hi Chris! I would be shocked if the wheels have a 5 on 5 bolt pattern. I don't think I have ever seen a 12" wheel with that bolt pattern. They will typically have a 5 on 4-1/2 bolt pattern and I would encourage you to have him look at the…
Hello Eric, The #K2R35DKG is Dacromet-coated, and the calipers are treated with KodaGuard. The #K2R35DS, on the other hand, is made entirely of stainless steel, hence the higher price. If you're in an area where road salt is common or if…
Hey Ed, The etrailer Swivel Jack w/ Bolt-On Mounting Plate #e54RV will come with the pin chained to it so that you can't lose it. I believe the instructions for this jack were prototype phase instructions and not final product where the pin was…
Hey Scott, the difference between the Kodiak disc brake systems part #KOD59FR and #KOD67FR is the coating that is on the calipers. The part #KOD59FR has a Kodaguard coating on the caliper whereas the part #KOD67FR has a Dacromet coating like the rest…
Hey Brad! The TecNiq Industrial LED Scene Light #TN43XR is water resistant and has the TecNiq TecSeal meaning it is outdoor certified. I wouldn't recommend submerging them (shouldn't be a problem for a cargo trailer I hope) but exposure to…
I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…
The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24, or 36 volt DC this light is compatible.
Hey Chris, sorry you're having that amperage draw issue on your AirLift #AL25980EZ setup. Do you know if you attached the pink wire to anything? It is optional, but AirLift recommends running that to your ignition switch so that it only gets…
Yes, you can splice the Low Profile LED Flood Light #3371492135 to your vehicle reverse lights. These only draw 1.5 amps so it wouldn't be an excessive drain on your light circuit.
The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…
In order to secure your 2018 Harley Davidson Tri Glide I recommend using the Tow-Rax Wheel Chock part #TWSPWM for the front wheel so long as it is not greater than 6-1/2" wide. Then in order to secure the two rear wheels I recommend using an…
i ordered on a tuesday and recieved my order on wednesday. very fast service and much cheaper than local auto parts stores
Eric
Murray, KY
Illuminate Your Work with Rectangle Work Lights
Rectangle work lights are perfect for enhancing visibility in various applications, from tractors to trailers. They offer bright, focused lighting that can extend over 100 feet, making them ideal for tasks like snow plowing or illuminating loading ramps.
Rectangle work lights are generally easy to install. They can be mounted on various vehicles and connected to existing circuits. Some users have even customized their setups with magnetic switches for automatic operation, showing their versatility and ease of use.
Yes, rectangle work lights can be used indoors, especially in areas where you need focused lighting without distraction. They're great for illuminating storage areas or inside truck beds. For brighter light, consider replacing the bulb with an LED equivalent.
Rectangle work lights are built to withstand tough environments. Many have been used for years in salt and road slush without issues. They're designed to be robust, making them suitable for outdoor use on vehicles like tractors and trailers.
Rectangle work lights provide a broad, focused beam that enhances visibility over long distances. They're ideal for tasks requiring precise lighting, such as snow plowing or trailer loading. Their shape allows for easy mounting on various vehicles, making them versatile for different applications.
Rectangle work lights typically require a 15-amp circuit when two are switched together. This ensures they operate efficiently and provide the bright, extended lighting needed for tasks like snow plowing or trailer illumination.
Filters
