How to Secure a 2018 Harley Davidson Tri Glide to a Trailer

Question

Question:

I own a 2018 HD TriGlide. I see that you stated the MC2301 will fit 2016 and older but not new TriGlides. is there a different one that will fit my 2018?

asked by: Ken

0

Expert Reply:

In order to secure your 2018 Harley Davidson Tri Glide I recommend using the Tow-Rax Wheel Chock part # TWSPWM for the front wheel so long as it is not greater than 6-1/2" wide. Then in order to secure the two rear wheels I recommend using an e-track system which is composed of the Erickson Horizontal E-Track part # EM19147 and the Erickson Adjustable Wheel Net with E-Track Fittings part # 77314. You can also add the Erickson E-Chock Wheel Chocks part # EM09162-2 for even more security but it is not a requirement. I have attached a photo of this setup for you as well.

Unfortunately, the B&W Biker Bar Motorcycle Tie-Down System for Trailers part # BWMC2301 will not work with the 2018 Tri Glides because of the location for the emergency parking brake cable.

expert reply by: Conner L

0

click to enlarge

Rocky F.

4/12/2025

Hi Conner, I like your advice. I also have a 2022 Harley Tri-Glide and want to put it into a 7X16 cargo trailer like your photo shows. I'm a little concerned about how far forward I need to put the Tow-Rax chock. The bile is 1200 lbs. Any suggestions? Thank you. Rocky

Reply

Jerred H.

4/12/2025

@RockyF Unless you plan on carrying other heavy gear in your trailer, I recommend installing the Tow-Rax Removable Wheel Chock w/ Wood Screws item # TWSPWM as far forward as you can in the trailer. This will help prevent any potential sway that can occur from not having enough tongue weight on a trailer. If you're transporting other heavy things then I'd leave space in front of the chock so you can spread those items out evenly. If you have any additional questions go ahead and throw them in the comment box below.

Reply

Answer 1

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 2

Hello David, The Curt Friction Sway Control for Weight Distribution Systems #17200 installs 24" from the center of the coupler to the trailer frame. I attached an image for reference. I recommend pairing it with the rocker ball, the Curt…

view full answer...

Answer 3

Yes, the Erickson Horizontal E-Track part #E19148 will be plenty strong enough to secure your two rock crawler buggies. The tracks are each rated at 6,000 lbs max break strength and 2,000 working load limit. I assume you would have a track under each…

view full answer...

Answer 4

The manufacturer does not provide a weight rating for the Erickson E-Chock Wheel Chock for E-Track, #EM09162. These are designed with overall dimensions of 8-1/2" long x 6-3/8" wide x 4-1/2" tall and to be used with a tie-down strap.…

view full answer...

Answer 5

You can install the Erickson Horizontal E-Track #E19148 in any manner you like, so for a car hauler that has cars of different widths you can place E-track side-by-side, as you can see one of our customers did in the accompanying photo. This E-track…

view full answer...

Answer 6

Ideally you'd want the anchor points for a wheel net like the SmartStraps #348851 to be in-line with the wheel, but since these are rated for 3,333 lbs (each) and you're using them for a Jeep you'll be perfectly safe to install them…

view full answer...

Answer 7

In order to install horizontal E-Tracks, like the etrailer #e42VR, you're going to have to install supports inside your trailer to fix them to. According to my research that CellTech wall isn't solid enough to drill into which is why supports…

view full answer...

Answer 8

Trailer stabilizer jacks like #TJSCHD-24 are not designed to be used to lift a trailer and hold it up for maintenance. Their purpose is to stabilize the trailer while it's parked and no more. What you're looking for is a jack to hold the…

view full answer...

Answer 9

I attached the picture I believe you were referencing for securing a Smart car too a Aluma trailer using E-track. The straps used in the picture are the Erickson Adjustable Wheel Net with E-Track Fittings #77314 which basically just snap into place…

view full answer...

Answer 10

You can use either wheel nets or wheel straps with the Erickson E-Chock Wheel Chock for E-Track #EM09162 (this is a quantity of one strap but can be ordered in a pair at part #EM09162-2). I recommend the Erickson Adjustable Wheel Net with E-Track…

view full answer...

Answer 11

There are A-frame jacks with the right weight capacity for your 10,000 lb trailer, but there are none that are sidewind cranks that have 8 inches or less of clearance so you can open your tailgate. The closest is the Pro Series Round, A-Frame Jack…

view full answer...

Answer 12

Hi James; the BTBRV Tongue Weight Scale #BTBRV44FR uses a 323 gauge so the margin of error is 3%. The gauge on the scale displays weight in 50-lb increments up to 2,000 lbs.

view full answer...