What is Difference Between Kodaguard and Dacromet Coated 3,500 lb Kodiak Disc Brake Kits
Published 02/27/2025 >
Question:
Good morning C/S Can you please explain the difference between your part numbers KOD59FR and KOD67FR. Thanks for your help.
asked by: Scott F
Expert Reply:
Hey Scott, the difference between the Kodiak disc brake systems part # KOD59FR and # KOD67FR is the coating that is on the calipers. The part # KOD59FR has a Kodaguard coating on the caliper whereas the part # KOD67FR has a Dacromet coating like the rest of the kit.
The Kodaguard option is the way to go though as it offers about twice as much corrosion resistance than Dacromet.
Aside from that both of these are for 3,500 lb trailer axles and have a 5 on 4-1/2 inch bolt pattern. If you have any other questions let me know!
Product Page this Question was Asked From
Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: dexter brake actuator
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Search Results: disc brake conversion kit
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - 3,500 lbs
- Video: Installation of the DeeMaxx Disc Brake Kit
- Q&A: Recommended Replacement 10" Disc Brake Kit for a Coyote Trailer for Saltwater Application
- Q&A: Recommended Disc Brakes for a 10" Wheel
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: wiring accessories and parts
- Search Results: heat shrink butt connector
- Search Results: trailer lights
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Dexter DX6.6 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 6,600 lbs
- Q&A: Can Dacromet Coated Rotors Be Used On A Boat Trailer In Salt Water?
- Q&A: Stainless Steel Rotor Recommendation for UFP 3,500 lb Trailer Axle Brake Setup
- Search Results: brake line tee
- Search Results: trailer hubs and drums
- Video: A Closer Look at theTecNiq Mini Clearance/Side Marker Light with Grommet
- Video: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps: The Breakdown
- Video: Mini Clearance/Side Marker Light w/ Grommet Spec Review
- Q&A: Parts Needed to Install Electric Brakes On a Tandem Axle Trailer With 3,500 Torque Axles Salt Water
- Q&A: Will Replacing Hub/Rotor with Hub Over Rotor Push Out the Wheels On One Axle
- Q&A: Fit And Compatibility Of The Kodiak 10" Rotor With The UFP DB35 Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: Let’s Check Out the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Video: What to Know About the Dexter Disc Brake Kit
- Video: Review of Goodyear Trailer Tires and Wheels - Endurance ST205/75R14 Radial Eagle Aluminum - GY57QB
- Shop: Front Mount Hitch


Scott F.
2/27/2025
Thank you for the timely response.