For your 2019 Mercedes Sprinter 2500 4x4 passenger van with a 144 inch wheelbase and a standard bumper the Draw Tite hitch part #75549 is a great option that fits easily and has plenty of towing capacity.
The hitches that fit the 2021 Mercedes Benz Sprinter 2500 with the step bumpers like part #75601 do sit lower than the vehicles that do not have the step bumper like part #75549. If you check out the two picture I attached you can see that the…
The 9' Long x 6' Wide Camco Reversible RV Outdoor Rug w/ Stakes, #CAM42881, ships in a box that is 25" x 7" x 22" and weighs less than 5 lbs. So depending on how tight you want to roll or fold it, it can at least be folded down…
The Thule Pulse roof cargo box part #TH615 will fit your 2022 BMW X5 once you get a roof rack installed and due to the profile of the box, the profile of your roof, and the lower height of the fin it would not interfere. Since I can see that your…
I reached out to the manufacturer, Rapid Switch Systems, who said the Side Bars for Rapid Switch Systems Pro Sport Racks #RS89FR measured 66 inches long. Adding these to your Pro Sport rack will add 300 lbs of weight capacity to the rack, but they…
There are three types of hinges for replacement roof vents: 3 point, 4 point, and continuous. Replacement #BV0534-00 has a closed round hinge, which is continuous. It sounds like you need either a continuous hinge that is not closed such as…
For your MaxxAir 4951KS the correct replacement lid is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K (smoke) or part #MA10A40002K (white). The shape of the lid is slightly less rounded as your current lid but it will…
The #MA10A40002K is only designed to fit on a MaxxFan or MaxxFan Plus Model so you would instead need the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke #MA05-30520 or #MA05-30510 (white) to replace your MaxxFan Deluxe lid. If you also…
To remove the hinge pin you'll need to remove the Phillips screw from each side of the cover. Then the lift arm supports can be disconnected from the lid, and the new lid can be put in place. You just want to make sure to replace all the hardware…
I do have an option for you but there is not an upgrade kit for a Fan-Tastic Vent E-Z Breeze Model 600 Vent Fan. Therefore, you will need to replace this for which I recommend using the Fan-Tastic Vent Model 2250 Roof Vent Fan part #FV802250 as it…
Hello Mitzi; the rear door of your ProMaster does not need to be open when using the Excel RV Tankless Water Heater #EX93FR. Extra air flow isn't a bad idea but this has a vent-free design with an ODS (Oxygen Depletion Safety) shutoff device that…
The Ventline Vanair Trailer Roof Vent part #VP-543SP is intended for use on the roof yes, but we have seen several others use this on the side of their trailer/van without issue. I do however recommend that you close the vent in any inclement…
Filters
