I'd go with a double spring personally, Scott. These are typically going to be used on more heavy duty applications like your enclosed trailer with a pretty heavy door. In order to get a proper replacement though, you'd need measure the width…
Hey Tim! The cable that comes with the Conventional Ramp Door Spring #362SA8207 can be ran over the top. I'm attaching a photo from a review someone sent in that has the cables ran this way for you to check out. Just curious why you're…
Hey Boyd! Yes, the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer #M386FR will work with your 95" wide ramp door. This is designed for enclosed trailer doors 94-3/8"- 95-3/8" wide so you fall into that range. It has a…
The spring with the black cable drum should always be mounted to your LEFT, standing on the inside of the trailer looking out. This is very important for proper operation. Dual spring systems, like #ERS160D96, have a red-coned and a black-coned…
To test the weight of your ramp door, you will want to get the door all the way down to the ground and then on a scale of some kind (a bathroom scale can be used for this if it's the only thing available). This will be when the door is at its…
To determine the correct weight springs you will need a scale to determine how much weight is on the door when it lays out on the ground. You will place the scale on the ground in the center of the landing path of the door edge. This will tell you…
Hi Brandon! For the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long #DX45QR, you will want the Bronze Spring Eye Bushing, 3/4" x 1" x 2-1/2" #14-67. This is a direct replacement for what came in…
...in 96 inches wide, # CB250D96SHD, and 81 inches wide, # ERS120D81.
Keep in mind that installation of this product is recommended for individuals who have experience winding torsion springs. If you...
Normally the trailer ramp springs like the #362SA5 attach to the inside of the top of a trailer door like the picture I attached shows. In the picture you can also see how it attaches to the ramp as well.
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Sounds like you are looking for a rear door/ramp spring kit for your trailer. For that we have the Enclosed Trailer Ramp Spring #ERS120D81 which would work well. This should work well for you but I also attached a picture of it's dimensions for…
We have an 8 foot ramp door spring that has dual torsion springs like you asked about with the part #M394FR. This is the hand wound torsion style spring you mentioned.
Filters
