Is There a Backing Plate for the HP54VR Trailer Fenders Available

Question

Question:

I am looking at buying the HP54VK Trailer Fenders. Do you have the backing plates for these fenders? Thanks

asked by: Mike S

0

Expert Reply:

I did not find anything on a HP54VK trailer fender, If you meant the # HP54VR Tandem Axle Teardrop Trailer Fenders, we do not have a custom fit fender backing plate that fits the # HP54VR.

However, we do have the Backing Plate for Tandem Axle Trailer Fender # HP72FR which can be cut to size to use on the Tandem Axle Teardrop Trailer Fenders # HP54VR.

expert reply by: Scott S

0

Answer 1

It can be difficult to match fenders up exactly when replacing them on your trailer. In general, you want to do your best to match the dimensions, but they aren't always going to be a perfect. The Tandem Axle Teardrop Trailer Fenders for Boat…

view full answer...

Answer 2

The Tandem axle trailer fender set part #HP54VR that you referenced would be the best as it's the closest to the dimensions you have as it measures 65" long x 9" wide x 15" tall. I attached an install video for this for you to…

view full answer...

Answer 3

For the Tandem Axle Teardrop Trailer Fenders for Boat Trailers - Steel - 14" Wheels #HP54VR, it really depends on how you install the fenders. If you bolt the fenders onto your boat trailer, they will definitely not be able to accommodate 300…

view full answer...

Answer 4

The Tandem Axle Teardrop Trailer Fenders for Boat Trailers - Steel - 14" Wheels #HP54VR measures 7-3/4" at the top and then 9" at the bottom (see attached). Our video team member goes over this as well in the linked review video.

view full answer...

Answer 5

The Stromberg RV ladder part #LA-401 that you referenced is a universal style ladder that would work well on your 2003 Coachman Shasta. It's designed to fit as many RVs as possible and would be a great choice for yours.

view full answer...

Answer 6

There are really only two standard trailer tire sizes for 15" wheels, 205/75-15 and 225/75-15 with the latter being the taller option (28.4" diameter x 8.9" wide vs. 27.3" diameter x 8.1" wide). I recommend the Karrier…

view full answer...

Answer 7

If clearance at the wheel wells and the additional inch of height at the coupler and floor is not an issue then larger tires are a good option. Larger tires create less friction as you travel because the number of rotations to go the same distance…

view full answer...

Answer 8

When replacing tires, you will want to make sure that if you go to a different size that the new size will fit. You will need to measure around the existing tire to see how much clearance there is between the tire and trailer frame and fenders if so…

view full answer...

Answer 9

Hey Scott! The etrailer 2 Swivel Jacks w/ Bolt-On Mounting Plates #e94RV are rated for 3,000 lb individually so they can collectively support 6,000 lbs. Are you planning on using these on the same trailer, or dividing them between 2 different…

view full answer...

Answer 10

The 11" CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards like part #CE11350 for blue, part #CE11330 for black, or part #CE11372 for charcoal is recommended for 2x4 bunk boards. It should not overlap but you will need to trim for the…

view full answer...

Answer 11

For 2 boards that are 2x6 and 96 inches long, I recommend the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Black - 18' Long x 18" Wide #CE11349. This will allow you to cover your boards completely. That will allow better hold to…

view full answer...

Is There a Backing Plate for the HP54VR Trailer Fenders Available

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching