Tandem Axle Spacing for Tandem Axle Trailer Fender Compatibility

Question

Question:

can you give me dimensions on item #HP94VR mainly spacing on the tires.

asked by: John B

1

Helpful Expert Reply:

The Tandem Axle Trailer Fenders - Double Radius - Steel - 14" to 15" Wheels - Qty 2 # HP94VR are 65" long x 9" wide x 15" tall and they are designed to work with 33 to 35 inch on center axle spacing.

expert reply by: Jason S

1

Answer 1

We recommend having about 4" of clearance height-wise to account for suspension movement and at least 2" width-wise between your tire and trailer fender or trailer frame like part #HP66VR that was referenced. Since you are building a…

view full answer...

Answer 2

Hi Dwight, We do have tandem axle trailer fenders that are very close to the 63" long, 14-1/2" tall & 9" wide fenders you have, which are the Tandem Axle Teardrop Trailer Fenders #HP94VR. The #HP94VR measure 65" long x 9"…

view full answer...

Answer 3

Hey Clayton, so the part #TRBU11561 is the correct length for you since your spring is 1-3/4 inches wide and we do not have a version of this that is 2 inches wide.

view full answer...

Answer 4

It is possible to mount the springs on top of the axle which is called "flipping the axle". To accomplish this we normally recommend an over-under conversion however there is not one with square u-bolts available for your square axle.…

view full answer...

Answer 5

Hi Rodger; you can absolutely replace your 63-3/4 inch boat trailer fenders with the 65 inch Tandem Axle Teardrop Trailer Fenders for Boat Trailers #HP34VR. We're talking just a hair over 1/2 inch longer on either side so it won't be an…

view full answer...

Answer 6

Douglas, it looks like the closest we have to what you're looking for is the Tandem Axle Teardrop Fenders w/ Backing Plates #HP92VR. These fenders measure 72" x 10 3/4" x 20 1/2", have the backing plates you're looking for, and…

view full answer...

Answer 7

I understand how frustrating it can be looking for a small plug under the dash and I am more than happy to provide some guidance on installing a brake controller in your 2002 Ford Expedition. From the information you provided me with there is a few…

view full answer...

Answer 8

The 12 volt power wire is present under the vehicle and is already fused so you would not need to hardwire in a relay or anything. Installing a brake controller and a 7-Way will be pretty easy on your 2002 Ford Expedition, even if it only came with a…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

Hey Matt, running a ground wire from the junction box to the frame of the trailer won't hurt anything and can only really help. The ground of the box should be running to the ground circuit of the 7-way connector it is attached to. If the lights…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Tandem Axle Spacing for Tandem Axle Trailer Fender Compatibility

Product Page this Question was Asked From

Continue Researching