Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…
Hey David. I couldn't find any pictures of the B&B Gutter Splice for RV without Awning item #BM96YR on the manufacturer's website and we just got this part in so we haven't had a chance to install it. The B&B Gutter Splice item…
Hi John! For the Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs #DX82UR, you will need the following parts: Replacement Caliper for Dexter 10" Brakes - Driver's Side #K71-773-01 Replacement Caliper for Dexter…
Hi Bill! The snap ring style bearing setups have been phased out, so there is not a kit with that replacement included, but we do have Replacement Outer Snap Ring for 35mm, 42mm, and 50mm Dexter Nev-R-Lube Bearings #69-96 which is confirmed for axles…
Good question, Mark. The RVpaws V2 pads are definitely stronger than most OEM setups. They are built from 1/4" plate steel with 6 gussets, so they’re a nice upgrade over thinner factory-style feet that have about 1/8" thick plate. The right…
Hey Dennis! If your fifth wheel uses standard 2" square leveling jack legs, the RVpaws articulating jack pads #RV24FR is the correct kit. If the legs are standard 2" round instead, you’d use #RV57FR. If you actually have Lippert Titan or…
Hey Jeremy, the closest thing we have to what you are looking for is the Maxxair Low Profile RV roof vent part #MA00-03851. It is an integrated roof vent and lid with a lower profile but the overall height is 4-1/8 inches above the roof line so…
Hey Fred! You will need to take some measurements to determine if you will have enough clearance with the B&W Gooseneck Pin Box #BW23RV. You can use the following formula: (A + B) - C = Clearance A = Distance from the gooseneck ball center to the…
We don't currently carry Trimark entry door locks so I wouldn't be able to get you a specific part for your current lock. I can however get you a replacement entry door lock if you can provide me with the cutout hole measurements. For…
The DB-42 is an older style of UFP 3,500 lb axle disc brake components. The Kodiak kits like the part #K2HR35D will fit in replacement of that and would be an upgrade so this would be a great solution. It comes with everything you'd need to…
Hey Ryan. We only have one hub that'll fit a straight spindle with 1-3/8" item #L68149 inner and outer bearings. It's the Dexter 9-3/4" Hub-and-Rotor Assembly item #DX82UR. This zinc coated hub and rotor assembly has a 5 on…
Hey Doug, from what I can see, the Camco RV Vinyl Trim Insert #CAM25312-10 and the Camco RV Vinyl Trim Insert #CAM25212 are the exact same. They both are 100' x 1", have the same shape, and are both made from Vinyl. I'm not too sure why…
Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…
Hey David. I couldn't find any pictures of the B&B Gutter Splice for RV without Awning item #BM96YR on the manufacturer's website and we just got this part in so we haven't had a chance to install it. The B&B Gutter Splice item…
Hi John! For the Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs #DX82UR, you will need the following parts: Replacement Caliper for Dexter 10" Brakes - Driver's Side #K71-773-01 Replacement Caliper for Dexter…
Hi Bill! The snap ring style bearing setups have been phased out, so there is not a kit with that replacement included, but we do have Replacement Outer Snap Ring for 35mm, 42mm, and 50mm Dexter Nev-R-Lube Bearings #69-96 which is confirmed for axles…
Good question, Mark. The RVpaws V2 pads are definitely stronger than most OEM setups. They are built from 1/4" plate steel with 6 gussets, so they’re a nice upgrade over thinner factory-style feet that have about 1/8" thick plate. The right…
Hey Dennis! If your fifth wheel uses standard 2" square leveling jack legs, the RVpaws articulating jack pads #RV24FR is the correct kit. If the legs are standard 2" round instead, you’d use #RV57FR. If you actually have Lippert Titan or…
Hey Jeremy, the closest thing we have to what you are looking for is the Maxxair Low Profile RV roof vent part #MA00-03851. It is an integrated roof vent and lid with a lower profile but the overall height is 4-1/8 inches above the roof line so…
Hey Fred! You will need to take some measurements to determine if you will have enough clearance with the B&W Gooseneck Pin Box #BW23RV. You can use the following formula: (A + B) - C = Clearance A = Distance from the gooseneck ball center to the…
We don't currently carry Trimark entry door locks so I wouldn't be able to get you a specific part for your current lock. I can however get you a replacement entry door lock if you can provide me with the cutout hole measurements. For…
The DB-42 is an older style of UFP 3,500 lb axle disc brake components. The Kodiak kits like the part #K2HR35D will fit in replacement of that and would be an upgrade so this would be a great solution. It comes with everything you'd need to…
Hey Ryan. We only have one hub that'll fit a straight spindle with 1-3/8" item #L68149 inner and outer bearings. It's the Dexter 9-3/4" Hub-and-Rotor Assembly item #DX82UR. This zinc coated hub and rotor assembly has a 5 on…
Hey Doug, from what I can see, the Camco RV Vinyl Trim Insert #CAM25312-10 and the Camco RV Vinyl Trim Insert #CAM25212 are the exact same. They both are 100' x 1", have the same shape, and are both made from Vinyl. I'm not too sure why…
Insert Trim is perfect for RV enthusiasts looking to upgrade or replace their existing trim. Known for its durability and ease of installation, this trim is a favorite among those who want a long-lasting solution that enhances the look and functionality of their RV.
Insert Trim offers a robust and long-lasting solution for RVs, providing a heavy-duty material that outlasts standard trims. It's easy to install, making it a great choice for DIY enthusiasts looking to enhance their RV's appearance and durability.
Insert Trim is often preferred over vinyl due to its superior durability and longevity. It's designed to withstand harsh weather conditions, making it ideal for those who frequently travel or live in varying climates.
Yes, Insert Trim is designed with ease of installation in mind. Even those new to DIY projects will find it straightforward to work with, thanks to its user-friendly design and the detailed specs provided with the product.
Absolutely! Insert Trim is highly recommended as a replacement for less durable trims used by manufacturers. Its heavy-duty nature ensures it will last much longer, providing a reliable upgrade for your RV.
Insert Trim is built to endure extreme weather conditions, making it perfect for RV owners in areas with cold, rainy, or otherwise challenging climates. Its durability ensures that it maintains its integrity and appearance over time.
Filters
