Solution for Needing Replacement Jensen RV Vent Flapper

Question

Question:

i need the flapper for a jensen range hood exhaust,,,,, the part number on it is 29-728,,,supposed to have to plastic hinge pins sticking out of it and it measures 10 7/8 inches by 4 3/8 inches and the corners opposite the pins are rounded.. where can i find this item

asked by: Frank H

0

Expert Reply:

Since we don't carry the Jensen brand of range hoods best solution we have is a new wall vent like the Ventline part # V2111-03.

expert reply by: Jameson C

0

Answer 1

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 2

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 3

Hey David, it is very possible to replace the Dometic RV AC units you have now with the Furrion Chill Cubes you mentioned but you would need to replace all parts of the system as none of what you have can be reused with the Cubes. So you would need…

view full answer...

Answer 4

Hey Eli! The Advent Air RV Air Conditioner System #ADV92SR you ordered is not compatible with a Dometic Duo Therm. However, it really doesn't matter. This is a new R32 refrigerant unit so it won't be backwards compatible with any of the old…

view full answer...

Answer 5

Hi Shawn! You're dealing with a common issue when installing a MaxxAir II cover #MA76JR on a MaxxFan 4751KS, like the #MA00-04751KSX. Here’s the situation you're running into: -First, the MaxxFan lid opens almost vertical when fully opened…

view full answer...

Answer 6

Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator #GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we sell here but they are available elsewhere.…

view full answer...

Answer 7

Hello David, The reason it’s $1000 more is because of the whopping 0.2 cu. ft. of extra space..... just kidding! The main difference comes down to the exterior and features. The #GE48FR has a sleek glass front that gives it a glossy, modern look,…

view full answer...

Answer 8

Due to the nature of pontoon boat trailers and the fact that pontoon guides like the part #CE27671 mount vertically and not horizontally you want shorter guides. Check out the picture I attached for more info.

view full answer...

Answer 9

Hey there Keith, I am sorry the thermostat on the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners #ACRG15 is not working correctly. It sounds like a frustrating issue, but let's go through a few things to see if…

view full answer...

Answer 10

Hey JP, it looks like the Replacement Gasket and Shim Kit for Furrion RV Air Conditioners #FR78NR is not going to work with your Dometic because this gasket is deigned to be used with Furrion ACs. Instead, you'd want to use the Steele Rubber RV…

view full answer...

Answer 11

If you have the Magnetek Power converter, Series 6300 Model 6325, there is not a direct replacement available, most choose to upgrade the entire system at this point. I suggest the Progressive Dynamics RV Power Control Center with AC/DC Panel and…

view full answer...

Answer 12

Converter output is typically talked about in amperage and not wattage. Your 6325 would indicate that you have a 6300 model panel with a 25 amp converter. You can replace just the converter if you don't want to replace the whole panel or you can…

view full answer...

Solution for Needing Replacement Jensen RV Vent Flapper

Product Page this Question was Asked From

Continue Researching