Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hi Tanya, Only certain bike racks are recommended for use behind a fifth wheel due to the extra movement and bounce the rack has to withstand behind a fifth wheel compared to when it's on the back of a vehicle. Bike racks are tested by the…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
Surco Products RV and Camper Bike Racks for ladders
Set up a no-fuss ladder mount on your RV or camper with Surco Products. Adjustable brackets fit ladder rungs with a maximum 14" distance between them, and sliding cradles help position bikes—add padding and bungies to protect contact points. Mount on the rear ladder only, and don't pair bikes with a ladder-mounted dump tank since the hanging bikes take up the ladder.
They can fit with a ladder-mounted dump tank, but carrying bikes at the same time typically won't work since the bikes hang down and use most of the ladder length. In the storage position the inner rack can block a door, so check clearance before committing. Adjust the mounting to reduce side overhang and verify door access with the rack folded.
Confirm your rung spacing matches the rack's bracket range and adjustability. The maximum distance between the brackets can be 14", and they can be adjusted up and down to accommodate the rungs. Measure your ladder and mock up placement before loading bikes. After installation, inspect for any bending or sag over time and distribute weight evenly.
Use padding and straps to hold bikes firmly and protect contact points. The cradles can be slid anywhere on the horizontal bar for ideal placement, but check that they don't move while mounting or after install. Test bike positions to keep them away from the trailer wall and separated from each other. Recheck tightness after a short drive.
Yes, they're designed for ladder-mounted use on the rear of RVs and campers. Installation is straightforward and the bike mounts secure when adjusted properly. Avoid mounting on a side ladder; exposure to traffic or obstacles can lead to contact and loss. Fine tune the position so bikes don't hang out to one side, and verify your ladder can support the load.
Filters
