Hello Douglas, Thanks for writing in, and thank you for your order! I am sorry to report that the manufacturer does not have a weld pattern or installation instructions available for the Sleeve-Lock A-Frame Trailer Coupler #CA-5296-B. I know that…
Welcome back Raymond. I can confirm that the Dellmead Thomas Payne RV Jackknife Sofa item #TP44AR and the Signature Dinette Cushion item #TP29AR are a commercial color match. They're made out of the exact same woven polyester fabric with dark…
Hey Mike, thanks for reaching out. Your roof thickness is going to make this tricky. That Advent system is really built around a standard roof thickness of 2-1/2" to 5", and at roughly 6-1/4" you’re outside that range. Advent doesn’t…
Hey Jonathan, We haven't heard of any issues with the P3 #90195 and plug-in harness #3070-P with a 2024 Honda Ridgeline. How are you sure that the brakes are being applied on your Honda when applying the manual override on the P3? What are you…
Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
Hey Keith! I can definitely help you find a replacement for your Dometic Duo Therm. However, you're going to have to replace the thermostat and air distribution box as well. Your current setup is for R410A and everything switched to R32 last year…
Hey Matthew, thanks for reaching out. We do have a heat strip kit that will work with the Advent Air RV Air Conditioner System #ADV99QR. For that you'll need the following: - Electric Heat Strip for Advent Air RV Air Conditioners - 5,500 BTU -…
Hey Ray, thanks for reaching out. Yes we do have a good option for replacing your Dometic Duo-Therm 57915.531. With yours being an older unit, there is not a direct rooftop swap that keeps your existing controls. The correct path is replacing the…
Hey Alan, while the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners #ADV98SR does have ability to control a furnace it can't be used with a Duo Therm setup like you have. It can only work with Advent Air AC…
Hey Rob! Thanks for reaching out. The Fogatti InstaShower 9 Pro RV Tankless Water Heater #FG33FR is compatible with a standard 15" x 15" door. Based on knowing what size your existing hot water heater door is, you should have no issues…
Yes, there is Mike. The Global Link RV Lock with Bluetooth Connectivity item #GL62VR does indeed have a deadbolt function. The top left key controls the deadbolt and the key built into the handle secures the door latch. I've attached a picture…
Very nice people that I talked to. Got what I paid for, very good product, will shop again. thanks.
Eric
Lexington, KY
RV Access Doors with Electrical Cable Hatch, Open Back
Install a clean pass-through that stands up to weather. These RV access doors pair an electrical cable hatch with an open back, making it easy to feed power cords or hoses while keeping rain at bay thanks to cable notches on some designs. Check your cutout and hole pattern to confirm fit—some replacements line up perfectly, others may need a slight enlargement, and finishes like flat black can match your paint.
Yes, when matched and sealed correctly it can help keep weather out while routing cords. Use the provided putty or sealant and seat the flange evenly. Some hatches include a notch so a cable can pass through with the door shut to reduce rain entry—verify this in the listing. After install, close the door on the cable and check for gaps you may need to seal.
Measure your existing cutout and outside footprint first. Compare both to the hatch's listed cutout and overall dimensions so the holes line up. If your opening is slightly smaller, you may need to enlarge it. Check center-to-center hole spacing when possible to confirm alignment. When replacing older round hatches, verify the outside diameter matches your existing trim ring.
They work well but tabs and hinges can be fragile on some designs. Inspect the latch tab design before install and avoid over-stressing it. If a door isn't designed to come off, you may need to replace the front assembly if it breaks. Some versions include a lock; if keyed, expect that only 1 key may be included. Test the latch action before sealing everything up.
Many include screws and putty, and installs can be quick. Use the packaging as a cutout template if provided, and a hole saw for clean edges. Dry-fit first to confirm hole alignment. If your finish needs to match, confirm whether black is flat or gloss in the description and photos. After mounting, tighten screws evenly to avoid warping thin plastic doors.
Filters
