Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'd…
Hey David, welcome back! The Seaflo Diaphragm Pump for Boats and RVs item #SE58FR is going to be our best replacement option we have for your Shurflo 4900-0201. The variable flow is based on demand so it would not run as hard with lower water usage…
Hey Steve, happy to help! The Victron MultiPlus II #VN43VR you're looking at can replace many of the functions of your Magnum MS2812, but there's an important difference with the AC connections. The #VN43VR has one AC input and two AC…
Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hey Albert, the Blue Technology PURBLU AR3 XLt Water Filter System #GB79FR should have gotten rid of all of the garden hose taste. I'd assume the issue is the water lines from the system that run to your faucets. Did you winterize your system…
Hey Jon, happy to help. Yes, I was able to find the replacement parts to #BM44YR. The 90 degree angle #BM99RR and the check valve #BM98GR have 1/2" MPT fitting that connect directly to your B&B RV Water Center. So no worries about…
Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…
They sure will Wade! The Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs item #AL89DQ are designed to fit all 4WD single rear models of the 2026 Ford F-350. The rear lift on the Tremor uses lifting blocks so there will be no compatibility…
Hey Guy, yes the Solera Regal Electric RV Awning Hardware Kit #LC28DX that you referenced does come with pitch arms. Like what you are looking for, this comes with everything but the awning fabric and roller tube. Do you have those components figured…
Hey Guy, the awning fabric of the etrailer replacement fabric kit for the 15 foot awnings part #e96QV is 14 foot 2 inches long. This will work as a replacement for other brands of awnings too as long as the dimensions are correct.
It sure does Steve! Our 3,500 lbs etrailer Electric Trailer Jack w/ Tongue Weight Scale item #e43KV also comes in a 5,000 lbs capacity. We have two different options depending on how you want to power it that I have listed below: Wired to Trailer -…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Eric
Cedar Springs, MI
HydroMax RV Water Pump for easy replacements
Upgrading your rig is simple with a HydroMax RV water pump that fits your setup. Match your 12V system's flow rate and PSI for a direct swap, and you'll appreciate the straightforward install and dependable performance. A solid pick when you want your fresh water running smoothly again.
Yes, but it's recommended not to adjust it since units are set at the factory for best results. If needed, turn the by-pass spring screw: turning it in raises pressure; turning it counterclockwise lowers pressure. Make small changes and verify performance to avoid overshooting your system's needs.
Match your current pump's specs. A HydroMax that is 12V with 3.0 GPM and around 55 PSI will provide similar performance. Check the label on your existing pump to confirm voltage, GPM, and pressure. Verify the mounting pattern and fittings on your setup, and plan for a simple 2-wire hookup.
Yes, installation is typically easy. These pumps are designed as an easy swap when your existing unit is 12V and 3.0 GPM. Use the simple 2-wire hookup, and compare the mounting pattern and fittings to your current pump. Inspect any plastic housing or fittings and replace damaged parts rather than trying to glue them.
It can run noticeably quieter than a factory pump and provide strong pressure. Users report it's super quiet with great pressure once installed. For best results, match it to a 12V, 3.0 GPM system and ensure secure fittings to help reduce vibration and maintain steady flow.
Filters
