Whether in a bedroom or an outside cargo bay, a 35 lbs rated RV TV mount keeps your screen steady on the road. Choose what suits your layout—wall slide/swivel, snap-in removable, or ceiling flip-down—and mount into a stud or solid support. Check your TV's VESA pattern and available clearance; an adapter or extra mounting height may be needed for larger patterns or to clear storage doors.
They can be very secure when locked, and we've seen firm holds even in moving vehicles and boats. Make sure the travel latch fully engages and the mount is anchored to solid supports. If your mount allows quick removal, you can take the TV down for rough roads. Re-check for any play around plugs or brackets that might need slight adjustment.
Yes, they're commonly used in storage compartments and outside entertainment areas. Check door clearance—some slide or flip mounts need extra mounting height to clear the opening. Plan cable routing so you can reach connections after the TV is installed. For flip-down styles, floor mounting can work if the TV is under 35 lbs; verify the lock operates in that orientation.
They should be installed into a stud or solid support. RV walls often need a vertical support to carry both the mount and TV, and heavy-duty mounts can benefit from shoring up the backing. Use the included hardware that matches your wall material and verify the latch or lock engages cleanly after installation.
Common fits are 75mm x 75mm, 100mm x 100mm, 200mm x 100mm, and 200mm x 200mm. If your TV uses 300mm x 300mm or 400mm x 400mm, use a VESA adapter plate that ties into the 200mm x 200mm points on the mount. Measure your TV's pattern before purchase and confirm the adapter's compatibility to avoid drilling or trimming around tight plug locations.
Yes, if the TV stays under 35 lbs and matches the mount's VESA pattern. We've seen 35 lb mounts carry about a 40" screen without issue when weight and pattern fit. Confirm the pattern on your TV and verify the mount's travel lock clears nearby cabinets or doors. If ports or plugs sit close to the bracket, check for clearance before tightening everything down.
Filters
