Hey Adam, that's clever use of a snake camera! That is definitely a Bladex setup that you have which we have replacement valve bodies for with the part #T1003DSPB if that's what you are looking for.
Hey Patrick, to end up with two 3 inch diameter electric waste valves what you'd want is two of the LaSalle Bristol MotoDrain waste valve part #LSB42TR as we don't have a kit like what you referenced with both 3 inch sizes. Do you have a…
Hey Henry! The #FR67TQ is for ducted setups and white. The #FR87TQ is for ductless setups and is black. Both are complete systems, and include the air distribution box (ADB) and remote. The actual AC systems themselves have different designs for…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Scott! The correct bearing kit for your Dexter 6k axle is the Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal #BK3-100. If you want the Dexter version it is the #DX26ER. What kind of trailer do you have?
The Kenda Karrier ST225/75R15 Radial Trailer Tire - Load Range E #AM10303 would work just fine to replace the Westlake ST235/75R15 tires currently on your trailer but will be about 1/2" narrower and shorter. The #AM10303 has a load rating of…
Hey Steven, I was able to find out that the center cap part number you mentioned is for a 3.75 inch diameter wheel pilot hole so for a suitable replacement we carry the #KE95JV which would work great. Did yours break or did they fall off?
Hey William, thank you so much for all of the information! To replace your axles, I recommend the Trailer Axle w/ Electric Brakes item #e73SR. This is a 6,000 lbs axle that come ready to install with pre-greased hubs and electric brake assemblies.…
Hey Bruce, thanks for reaching out! You'll want to go with the Thetford Aqua-Magic Style II RV Toilet #TH75SE to replace your model 42073 toilet (according to my contact at Thetford). Did your old one wear out, or something go out on it?
Different manufacturers sometimes have different philosophies about the set-up process of a weight distribution system on a vehicle with factory air shocks. I can share with you the process we have found to work well for us when setting up a weight…
Hey Steve, do you know what brand of RV steps you have? If they happen to be the MORryde StepAbove style of steps we have the boot scraper/brush part #MR49RV. Then for a telescoping hand rail we have the MORryde part #MR54BR.
Hey Phil! For a tandem axle trailer you will want two of the Leveling Kit with Wheel Chocks for Trailers and RVs #WS28ER. You are correct, one under each tire is best. I use these on my Jayco with one under each tire to keep them off the ground and…
Hey Adam, that's clever use of a snake camera! That is definitely a Bladex setup that you have which we have replacement valve bodies for with the part #T1003DSPB if that's what you are looking for.
Hey Patrick, to end up with two 3 inch diameter electric waste valves what you'd want is two of the LaSalle Bristol MotoDrain waste valve part #LSB42TR as we don't have a kit like what you referenced with both 3 inch sizes. Do you have a…
Hey Henry! The #FR67TQ is for ducted setups and white. The #FR87TQ is for ductless setups and is black. Both are complete systems, and include the air distribution box (ADB) and remote. The actual AC systems themselves have different designs for…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Scott! The correct bearing kit for your Dexter 6k axle is the Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal #BK3-100. If you want the Dexter version it is the #DX26ER. What kind of trailer do you have?
The Kenda Karrier ST225/75R15 Radial Trailer Tire - Load Range E #AM10303 would work just fine to replace the Westlake ST235/75R15 tires currently on your trailer but will be about 1/2" narrower and shorter. The #AM10303 has a load rating of…
Hey Steven, I was able to find out that the center cap part number you mentioned is for a 3.75 inch diameter wheel pilot hole so for a suitable replacement we carry the #KE95JV which would work great. Did yours break or did they fall off?
Hey William, thank you so much for all of the information! To replace your axles, I recommend the Trailer Axle w/ Electric Brakes item #e73SR. This is a 6,000 lbs axle that come ready to install with pre-greased hubs and electric brake assemblies.…
Hey Bruce, thanks for reaching out! You'll want to go with the Thetford Aqua-Magic Style II RV Toilet #TH75SE to replace your model 42073 toilet (according to my contact at Thetford). Did your old one wear out, or something go out on it?
Different manufacturers sometimes have different philosophies about the set-up process of a weight distribution system on a vehicle with factory air shocks. I can share with you the process we have found to work well for us when setting up a weight…
Hey Steve, do you know what brand of RV steps you have? If they happen to be the MORryde StepAbove style of steps we have the boot scraper/brush part #MR49RV. Then for a telescoping hand rail we have the MORryde part #MR54BR.
Hey Phil! For a tandem axle trailer you will want two of the Leveling Kit with Wheel Chocks for Trailers and RVs #WS28ER. You are correct, one under each tire is best. I use these on my Jayco with one under each tire to keep them off the ground and…
Enhance Your RV Experience with Prest-O-Fit 3-Step Covers
Prest-O-Fit 3-step covers are perfect for RV enthusiasts looking to enhance safety and cleanliness. These covers offer a non-slip grip, are easy to install, and help keep dirt out of your RV. With durable materials and a snug fit, they ensure your steps are safe for both humans and pets.
These covers provide a non-slip grip, reducing the risk of slipping, especially when wet. They are designed to fit snugly, ensuring stability and safety for both humans and pets, making them a great choice for families traveling with dogs.
Yes, they are designed for easy installation with four springs for secure attachment. This ensures they stay in place and are simple to set up, even for those new to RV accessories.
Absolutely, they act like a doormat, trapping dirt and debris before it enters your RV. This helps maintain a cleaner interior, reducing the amount of cleaning needed after a trip.
Made from durable materials, they are built to last. Users have noted that even after a year, the springs and covers remain in good condition, providing long-term value and reliability.
Yes, they are designed to withstand various weather conditions, providing a reliable grip and protection against dirt and moisture, making them ideal for year-round use.
Filters
