Videos
for RV Plug Adapters
Help Articles
for RV Plug Adapters
Expert Answers
for RV Plug Adapters
Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…
view full answer...Hello Debbie, thanks for reaching out. Yes, the Patriot Hitches 2" Adjustable Hitch Adapter #PH48PR can work for your setup. The 11" rise should get you very close to level, and being about 1 inch off still keeps you well within the typical…
view full answer...Hey George, yes we do have a rain cover for the Watchdog Power Center part #HU74ZR with the part #HU88FR.Did you have the previous generation Watchdog?
view full answer...Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
view full answer...Hey Lennine. The only convection microwave we have that would fit your 20-1/2" cutout is the Furrion Built-In RV Convection Microwave and Air Fryer w/ Trim Kit item #FR77AD. It measures 19" wide x 13-3/8" tall x 15-1/8" deep. The…
view full answer...It sure can Ken. The PowerMax 30A RV Power Center and Distribution Panel item #PM67VR is designed to accept a standard 120VAC, 30 Amp input, which is what you'll get with shore power provided by most generators. This power center has a 55 amp…
view full answer...Hey Michael! Since you were looking at the SoftStartRV Soft Start #SSR54FR are you wanting that built in as well? The Active Controls ActiveStart Plug-In Soft Start for RVs #AS94FR is a soft start and surge protector all in one. If you aren't…
view full answer...Hi Debbie, thanks for reaching out. You are on the right track looking for a 12" drop adapter. For the amount of drop you need, the best heavy-duty option we have is the Gen-Y Adjustable 2-Ball Mount with 12" drop, part #325-GH-625. It uses…
view full answer...Hey Dwight! The Andersen Camper Leveler #AN68VR is for a single axle. You will need to order a quantity of two for your tandem axle trailer. What kind of trailer do you have?
view full answer...Hey Shane, the IOTA IDP-30 was a 30 amp distribution panel like the Progressive Dynamics 5000 Series AC/DC Distribution Panel #PD94MR that you referenced so this would be a great option to replace what you have. Did yours stop working?
view full answer...Hey Sean. The Roadmaster Falcon 2 Tow Bar item #RM-525 is just the tow bar with a set of adapters for a Blue Ox baseplate. It has no electrical wiring, safety chains, or braking system. You'll need to purchase those separately along with a…
view full answer...Hey Jan, thanks for reaching out. Yes I can provide a full parts list for that. Assuming you don't already have a rear trailer hitch, here is what I recommend for pulling the utility trailer: - etrailer Trailer Hitch Receiver - Custom Fit - Matte…
view full answer...