Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
Hey Craig! Is this a Lippert Ground Control system? Is the part actually 304136? I asked Lippert and they said they don't have anything under 304135. If it is the 304136 the correct replacement is the Replacement Control Module for Lippert Ground…
Hey Jerry, does the LED still light up on the front of the Mighty Cord SurgeMinder Surge Protector and Circuit Tester #SU39SR? If it was actually overloaded it would have damaged the internals of it and it wouldn't work as a surge protector any…
Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Scott. The Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump like item #FR97TQ in black or item #FR67TQ in white are only available in 18K btu capacities. The Chill Cube uses variable-speed technology, which allows it to reduce…
Hey Steve, yes the Dexter Nev-R-Adjust Brake Assembly set part #23-458-459 is the correct set for your Airstream based on the part numbers you mentioned. Also the hub/drum part #8-388-80UC3 that you referenced as well would be correct for your…
Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
RV Interior Lights with Puck Light by Command Electronics
Light your rig the way you like with Command Electronics puck light options built for 12V interiors. Choose warm white - 3,500 kelvin for a softer glow or go bright white when you want more punch. Match the mount style (surface or recessed), decide on a built-in push switch or wall-switch wiring, and confirm diameter and hole pattern so it drops right in where your old light sat.
Plan to replace the entire light rather than only the lens. We've seen cases where the lens isn't sold separately and the complete light is recommended. Verify your light's size, mount type, and color temperature before ordering the full assembly.
Both styles exist, so check the switch type in the description. Some have a rubber push-button on the light; others are not push lights and must be wired to a switch. If a rubber push button has stuck on you before, choose a solid on/off style or a model intended for a wall switch.
Measure the light diameter and note surface-mount vs recessed. For surface-mount, confirm the screw count and spacing. For recessed, check the cutout size and make sure there's room for the tension springs. Matching these details helps a plug-and-play swap and keeps the light seated securely.
Warm white at 3,500 kelvin is available. If you prefer a softer look, confirm the listing specifically calls out warm white - 3,500 kelvin. Compare it to your existing light's tone so mixed colors don't clash in the same area.
Filters
