RV Cabinet And Drawer Hardware - Matte Black

Hey Nancy! The Thomas Payne RV Jackknife Sofa w/ Hinges #TP58KR doesn't have any legs. It is designed to sit on an existing base/legs which you can see examples of in the attached picture. I can't tell in the brochure if that is what you have…

Hey Craig, we have the SPST switch part #37213815 that is weather proof and would work great for the ramp light on your horse trailer. It has a light built into the switch but you don't have to wire up the light portion of it.

Hi Charlie; I'm sorry to say the Lynx was discontinued by Lionshead and we no longer have any of the 16" in stock. The closest match is the Aluminum Margay Trailer Wheel #LH78VR.

Hey Jason, welcome back. It looks like you purchased the etrailer Hard Tonneau Cover item #e45DR a couple months back for your 2025 Silverado 2500. This quad fold style is going to be the best option so you can get it out of the way when you're…

Hey Ryan, great question! Yes, the Waltech Vision 2.0 RV Thermostat and Wireless Control Hub #WA74FR can be used without WiFi or the SIM card. If you only want to use it locally through your phone it will work via Bluetooth through the app. The WiFi…

Hello again Donny; your 2025 Winnebago Access 26RL is prepped for a 2,000 to 3,000 watt pure sine wave inverter. The Progressive Dynamics 2000 Watt Inverter #PD64FR you were looking at is a great choice. This will be able to handle pretty much…

Hey Jeffrey, the Dometic RV toilet part #DMC44JF is designed to fit toilet applications with a 7-5/8 inch rough in measurement which is the measurement you took. Since your current setup has 10-1/4 inches this would work with space to spare. What…

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

Hey Rich, the standard Maxxair roof vent cover part #MA00-933066 is what Maxxair recommends to fit your Ventadome. This cover was designed to match up with the 4 mounting points on the Ventadome.

Hey Greg, yes our Dometic RV Furnace part #DMC86RR is our lowest BTU rated RV furnace. Thankfully nearly all RV furnaces are made to the same size which makes swapping them easier. For a thermostat we have the Dometic Digital part #DMC84RR which is a…

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

Hey Clyde! The Furrion Chill Cube will be a really nice upgrade so I highly recommend going that route for replacement. This unit is super quiet and incredibly efficient with a lot of cooling power. This will be a complete replacement since…