The correct replacement lid/dome for a MaxxFan* 4751KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K for black or part #MA10A40002K for white.
Hello Mark, welcome back. The MaxxAir II RV and Trailer Roof Vent Cover #MA76JR is compatible with your MaxxFan #4751K. It may not be tall enough for the vent lid to open fully, but as long as the lid is 50% open you will be getting maximum airflow…
Hi KD; the GE Appliances Deluxe RV AC #GE34FR will not work with your existing thermostat unless it happens to be for an R32 GE AC. Everything is switching over to R32 refrigerant which requires a whole new setup. You can choose from the following…
Since Dometic is who makes the A and E awnings and the Solera Screen Room part #LC362218 is compatible with Dometic awnings it would work great for you. No special steps would be required.
Since you have a 19' Solera awning you will need to match the size for the family room and screen room. For the family room you can use the Solera Family Room for RV Awnings - 19' Wide #LC362234. The screen room you are looking for is the…
To remove the old pin you'll need to remove the cover, remove the two retaining pins, and then slide the old pin out. To install the #LC93FR you'd just reverse the process.
What you have referenced is the Solera 17' RV Awning Roller and Fabric, #LCV000231446 has the roller assembly with the awning fabric. If you are wanting to replace just the fabric we have that in several options of color and dimensions. Such as…
The closest Go Power option to the Magnum Energy MM1212 Inverter Charger is the Go Power Industrial Pure Sine Wave Inverter Charger #34280055. This inverter/charger is rated for 2000 watts running and 4,000 watts surge/startup. This equals out to…
The MaxxAir FanMate RV and Trailer Roof Vent Cover is available in White #MA00-955001, Black #MA00-955002 and Smoke #MA00-955003. This cover is specifically designed to mount on the tabs that are on the roof portion of your fan using the included…
I have linked a diagram that shows the procedures listed below that go step by step in how to fill your Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter item #RP85FR with air. 1. Perform the hitching procedure before adjusting…
Hi David; Curt excludes the 6-3/4' bed from their fitment for the #C68ZV so it will not work with your 2025 GMC Sierra Denali. What you can use instead is the Gen-Y Hitch Gooseneck Trailer Hitch for GM OEM Puck Systems #GY55XR.
The Goose Box Doesn't specifiy the height required from the ground to the ball. Instead it specifies the height from the coupler connection to the front bottom bolt where the pin box attaches. I've attached photos of these dimensions to…
Filters
