RV Awning Screen Room - Screen Room

Hey Connie, the Sea Flow RV Toilet part #SE92MR will fit your 9 inch wall rough in dimension and it also has a 300 lb weight capacity.

Hello Mark, welcome back. The MaxxAir II RV and Trailer Roof Vent Cover #MA76JR is compatible with your MaxxFan #4751K. It may not be tall enough for the vent lid to open fully, but as long as the lid is 50% open you will be getting maximum airflow…

The correct replacement lid/dome for a MaxxFan* 4751KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K for black or part #MA10A40002K for white.

Hi KD; the GE Appliances Deluxe RV AC #GE34FR will not work with your existing thermostat unless it happens to be for an R32 GE AC. Everything is switching over to R32 refrigerant which requires a whole new setup. You can choose from the following…

...Since Dometic is who makes the A and E awnings and the Solera Screen Room part # LC362218 is compatible with Dometic awnings it would work great for you. No special steps would be required...

...We have a 2022 Stryker Toy hauler. We are interested in an awning room and a screen room to attach to the back porch. I have a solera V000329700 19' blksolid FABLEDWH RPO-0007312200 CRUISER RV...

To remove the old pin you'll need to remove the cover, remove the two retaining pins, and then slide the old pin out. To install the #LC93FR you'd just reverse the process.

What you have referenced is the Solera 17' RV Awning Roller and Fabric, #LCV000231446 has the roller assembly with the awning fabric. If you are wanting to replace just the fabric we have that in several options of color and dimensions. Such as…

The closest Go Power option to the Magnum Energy MM1212 Inverter Charger is the Go Power Industrial Pure Sine Wave Inverter Charger #34280055. This inverter/charger is rated for 2000 watts running and 4,000 watts surge/startup. This equals out to…

The MaxxAir FanMate RV and Trailer Roof Vent Cover is available in White #MA00-955001, Black #MA00-955002 and Smoke #MA00-955003. This cover is specifically designed to mount on the tabs that are on the roof portion of your fan using the included…

The Goose Box Doesn't specifiy the height required from the ground to the ball. Instead it specifies the height from the coupler connection to the front bottom bolt where the pin box attaches. I've attached photos of these dimensions to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…