Hi Guy, That's a great question, and thank you for providing so much detail. It really helps narrow things down. Based on your description, it sounds like you may have cruiser style or step through bikes with front baskets, and that combination…
Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
This site is top notch: Great prices, great service. Highly recommended.
Scott
Lafayette, CO
CURT RV and Camper Bike Racks for hitch receivers
Get hitch-mounted hauling you can trust for your camper with CURT RV and camper bike racks. Choose between platform and hanging styles and match your 1-1/4 inch or 2 inch receiver; some options work with class I hitches. For trailer fronts, check rack length and mast height for clearance, and expect pin-and-bolt adjustments; select models offer replaceable arms and compatible anti-rattle hardware.
CURT platform styles can secure step-through frames when the bracket or arm is set low enough. During assembly, adjust the bracket position to reach the frame. For loading, remove the frame holders, position the bike, then slide the holders back into place. Reinstall all holders before driving.
Measure from your hitch pin hole to the nearest obstruction and compare to the rack's overall length spec. Also check the height from the shank to the arm/mast center to be sure it clears tanks or a front wall. If space is tight, choose a configuration with shorter reach or adjust the rack position to avoid contact.
Make sure the tires sit deep in the track; if they ride high, adjust the wheel trays or use trays sized to your tire width. Tighten the frame arms snugly and fully seat all pins. For fat tires, CURT offers options that fit tires up to 4-7/8 inches; match your bike's width and weight rating before use.
Yes, CURT offers racks that fit 1-1/4 inch receivers. Confirm your hitch class; some CURT racks are compatible with Class I. Expect an anti-rattle bolt/pin—line up the holes before threading to make install smoother. If the rack feels heavy to lift into the receiver, support its weight while aligning to reduce strain.
Filters
