Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hey Jonathan, We haven't heard of any issues with the P3 #90195 and plug-in harness #3070-P with a 2024 Honda Ridgeline. How are you sure that the brakes are being applied on your Honda when applying the manual override on the P3? What are you…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
Hey Keith! I can definitely help you find a replacement for your Dometic Duo Therm. However, you're going to have to replace the thermostat and air distribution box as well. Your current setup is for R410A and everything switched to R32 last year…
Hey Matthew, thanks for reaching out. We do have a heat strip kit that will work with the Advent Air RV Air Conditioner System #ADV99QR. For that you'll need the following: - Electric Heat Strip for Advent Air RV Air Conditioners - 5,500 BTU -…
Hey Alan, while the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners #ADV98SR does have ability to control a furnace it can't be used with a Duo Therm setup like you have. It can only work with Advent Air AC…
Hello Wayne, Great question, because this is one of those details that isn’t obvious until you look closely at the install. On the Furrion Chill Cube #FR59TD, the oscillating outlet is designed to face the front of the RV. During installation, the…
We got you covered Sherrel, thanks for reaching out! If your Jeep Wrangler has a different bumper than the standard factory, please let me know because that would change which base plate is compatible with your vehicle. This flat tow setup is for a…
Hello Greg, thanks for reaching out. Sadly, we do not offer any replacement rubber springs for the Timbren Axle-Less Trailer Suspension. Your best bet would be to reach out directly to Timbren for that. I believe they can provide them. The rubber…
Hey Alex. From the information I can find online it does look like your 2011 Keystone Cougar 318SAB does come prepped for a second AC unit. The bedroom roof vent should be reinforced and pre-wired for a 13.5k or 15k BTU unit. To check if your trailer…
Hey Denise, Advent does have an RV AC unit that has ability to control a furnace as well but it needs to be one like the part #ADV92SR that has a wall thermostat and not the part #ADV32SR that has all of it's controls built into the vent…
Hey, Jason. Thanks for reaching out! Yes, the Furrion Chill Cube part #FR59TD will come with the bolts and seal to for install. The seal is already attached to the bottom of the main AC unit, and the hardware will come along in with the air…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
TorkLift RV Access Doors for Shore Power Security
Set up your shore power cleanly with TorkLift RV access doors. Choose painted white or black to match your rig, and use the locking design to prevent theft of your RV cord while keeping installation straightforward and solid.
Yes, it's a locking door that helps deter theft of your RV cord. Install the door so it closes cleanly over the opening and verify the latch engages fully. If you need a different keying system, consider upgrading the cam lock after installing the door.
Installation can be straightforward. Line up the mounting holes with your cutout and hardware, then secure the frame so the door swings and latches smoothly. If your existing pattern doesn't match, plan on drilling new holes and double-check the interior depth before tightening everything down.
TorkLift access doors come in painted black and painted white. If you're matching a silver or chrome look, there isn't an unpainted or chrome option from TorkLift. Choose the color that best blends with your exterior or trim.
It can, but the mounting hole patterns may differ and you might need to drill new holes. Check the door's hole spacing and interior depth against your inlet before installing. If the patterns don't match, mark and drill carefully to avoid misalignment.