Thanks for asking Glen, I found the specs you were asking about. Bigfoot Hydraulic Tongue Jack #BF34FR has 16.5 inches of lift, and when it’s fully extended it measures at 24 and a half inches overall. Retracted, it sits at 8 inches, so you get a…
Hey Bill. We've got just over a dozen options for 15" steel wheels that'll work with the Kodiak Disc Brake Kit item #K2R35S, you were looking at. I have linked our selection below. The 15" x 6" Rim Dexstar Steel Mini Mod…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
I would be happy to help! Since your 2021 Subaru Outback Touring XT has the factory 4-way connector I recommend using the 7-way Connector Kit #ETBC7L which is designed specifically for wireless trailer brake controllers. This 7-way plugs into your…
No, they're not the same. The BP01-301 fits 12-1/4" x 4" Dexter brake assemblies and the BP01-330 DEXTER fits newer Dexter brake assemblies made after 2017 that are 12-1/4" x 5". We are out of the BP01-301 as well and have…
Dexter recommends that you check the wires of the brake assemblies of your trailer to determine which magnet would be what you would need. If the wires are white you would need part #BP01-265 and if they are yellow part #BP01-301. However, aside from…
The correct bearing kit for a Dexter 4,400 lbs axle is item #BK2-100. The Dexter 4,400 lbs axles use the same bearings and seals as a Lippert 3,500 lbs axles. This kit includes inner bearing item #L68149, inner race item #L68111, outer bearing item…
Typically the tongue weight listed on a trailer is the dry, or empty tongue weight. Tongue weight varies not only by how much stuff you have loaded in the trailer, but where it is positioned. You can add 200 pounds of cargo to a trailer and get the…
Yes, all of the locks and keys in the Trimax Stainless Steel Padlocks with 3/8" Shielded Shackle Set #TMX48ZR are keyed alike so you don't have to keep track of all that!
The best way to get interior lights in your trailer is to have a dedicated 12 volt battery, and battery box like #329-HM318BKS mounted to the trailer. This gives you the power needed while you're not hooked to your truck. For lights I recommend…
Electric brakes on a boat trailer are able to be used without much issue at all. There obviously is an issue with water and electricity, so it is recommended to disconnect the trailer connection when your trailer is being submerged for launch. A few…
I'll try to start this answer off with some of the most important information- the batteries. The batteries you will need to power all of this would need to be 12v deep-cycle batteries with enough amp hour rating to power all of the tools and…
Ya have a great web site, but more importantly, I received the items that I ordered, ASAP. Your web site is very, very effective. Thanks so much. Mike
Mike
Arlington, TX
Padlocks with Hidden Padlock for trailers
Built to secure trailer doors and hasps, these padlocks use a hidden padlock design that shields the shackle from cutters. This style fits latches that accept a 3/8" diameter shackle pin and sits tight for less pry room. Choose keyed-alike packs or unique keys, and some can be rekeyed by a locksmith; corrosion-resistant builds and lube ports are available for long-term use.
Yes, they're built for outdoor use, with options that show no signs of rust after one year of use. For high corrosion areas, aluminum construction is better, while steel is another strong option. Look for weather-resistant finishes and lubrication ports to keep them opening and closing smoothly.
Yes, some hidden padlocks are sold in keyed-alike 2-packs or 3-packs, while certain singles are keyed unique. Check the listing to confirm keyed-alike before you buy. If you need one key for all, a locksmith with the pin kit and experience can rekey them so one key fits all the locks.
They improve security by hiding the shackle and fitting tight on the hasp to reduce cutter access. Choose a design with a recessed locking bar for a snug fit, not one that hangs on the latch. They help deter quick cuts, though a heavy-duty power tool can still defeat most locks.
It can, as long as your hasp matches the lock's opening and accepts a 3/8" shackle pin. Measure the hasp width and thickness and compare to the slot dimensions listed for the lock. Test-fit on the door closures or coupler latch style you use. If it feels tight on the hasps at first, work it a few times and it should settle in.
Filters
