Thanks for asking Glen, I found the specs you were asking about. Bigfoot Hydraulic Tongue Jack #BF34FR has 16.5 inches of lift, and when it’s fully extended it measures at 24 and a half inches overall. Retracted, it sits at 8 inches, so you get a…
Hey Bill. We've got just over a dozen options for 15" steel wheels that'll work with the Kodiak Disc Brake Kit item #K2R35S, you were looking at. I have linked our selection below. The 15" x 6" Rim Dexstar Steel Mini Mod…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
Hey Josh, so we can help but we don't have any custom fit gooseneck hitches that fit your 1976 Ford F-250. Best option would be a universal style option like the Curt plate part #C65500 which would need to get welded to the top of the truck frame…
Hey John, the replacement gear kit you'd need is the part #TJD-12000-RODNUT which I attached two pictures that have instructions and an install diagram.
Good news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears #TJD-12000-RODNUT in the #12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically,…
The Thule Wingbar Evo crossbars like #TH711320 have channels on top of them that standard roof rack accessories that are designed for channel mounts. The track nut part #853-5715 that you referenced would fit in this top channel as well.
I would be happy to help! Since your 2021 Subaru Outback Touring XT has the factory 4-way connector I recommend using the 7-way Connector Kit #ETBC7L which is designed specifically for wireless trailer brake controllers. This 7-way plugs into your…
No, they're not the same. The BP01-301 fits 12-1/4" x 4" Dexter brake assemblies and the BP01-330 DEXTER fits newer Dexter brake assemblies made after 2017 that are 12-1/4" x 5". We are out of the BP01-301 as well and have…
Dexter recommends that you check the wires of the brake assemblies of your trailer to determine which magnet would be what you would need. If the wires are white you would need part #BP01-265 and if they are yellow part #BP01-301. However, aside from…
The correct bearing kit for a Dexter 4,400 lbs axle is item #BK2-100. The Dexter 4,400 lbs axles use the same bearings and seals as a Lippert 3,500 lbs axles. This kit includes inner bearing item #L68149, inner race item #L68111, outer bearing item…
The phone operator was very helpful and made my purchase easy. I will keep this website handy.
Harold
Gillsville, GA
Stainless Steel Padlocks with Keyed-Alike Convenience
Built for straightforward convenience, stainless steel padlocks can keep multiple points secured with the same key when you choose keyed-alike sets. For fit, match the shackle to your hasp—a 3/8 inches shackle will go through a 7/16 inches opening—and double-check tongue clearances if space is tight.
No, diamond plate finish is not offered; these come in their current finish. A hidden version is available, but it may not be the exact style you're looking for. If you want no visibility from outside, compare the hidden style's design to your setup.
Yes, keyed alike Stainless Steel padlocks are offered. This makes for simple ease of use across multiple locks. When ordering, make sure to check the keyed the same box so you get matching keys for all your locks.
Match the shackle size to the opening you're locking. A lock that works well on doors can be too large for a tongue. Measure the opening on the tongue or hasp and compare to the shackle diameter, such as 3/8, to confirm fit before you choose.
Yes, if the shackle is 3/8 it would fit a hasp that is 7/16 in diameter. It would be tight, but the shackle is small enough in diameter that it would fit. Measure your hasp opening and match it to the listed shackle diameter before you buy.
Filters
