Hi Gina; from what I was able to find that is an 86-1/2" long 5,200 lb axle. For a replacement you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles #8327816. However, this axle has a spring center measurement of 71-1/2" and it…
It does sound like your bearings are a #L44649 (1.063" inner diameter). If they are original to the trailer they may be pretty worn, which is why your measurements may be off by a few hundredths. Also the seal #34823 that can be used with the…
Hey Tony. The Replacement Anti-Rattle Hitch Pin for Curt Bike Racks item #C82NR is only 3.8” long so it's not going to work with that wider 2" receiver Toyota has decided to go to. If you're needing a new locking anti-rattle, threaded…
Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…
The best way to determine which ball mount is right for your 2005 Chrysler 300c and your trailer is to take a few simple measurements. Since you don't have the hitch we can see by the video of the Curt #13465, I've attached, that the hitch…
The closest axle we have to what you need is the part #20440I-EZ-60 which has very similar specs as what you need, but the spring center is off by one inch as it is 48 inches on this axle. The overall capacity is 2,000 lbs and the hub face to hub…
I have a solution for you. As you know the unit you are looking for is no longer available and we do not have replacement parts either. However, I do have the replacement for that unit which is the following part: **Progressive Dynamics Transfer…
We do not mount tires in house, so if you order just a trailer wheel like #DEX54FR and a trailer tire you'd get them separate ready for a local tire shop to get them mounted. To get them mounted from us you'd need to purchase a wheel and tire…
The cable to operate the release on the Bulldog Gooseneck Coupler part #BD0289340317 is not included because it is not needed. It is only for convenience as you can still operate the coupler lock with just the handle. If you do want to add a cable…
Hey Tom, The overall length of the Taskmaster Trailer Wheel Lug Nut #TA76QR is approximately 1-7/8" but the useable portion after the cone is 1-1/2" long.
Thanks for the picture! To be able to install the 5' Dutton-Lainson Boat Trailer Deluxe Roller Bunk #DL21741 on your trailer you can simply bolt them to your existing carpeted bunks due to you not having any center supports on your trailer. Keep…
The Dutton-Lainson Roller Bunk #DL21741 that you referenced can be installed directly on top of your existing wooden bunks. According to the installation instructions when mounting over wooden bunks a 3/8 inch diameter lag screw is required. The…
Filters
