Novelty - Letters and Numbers

Hi Gina; from what I was able to find that is an 86-1/2" long 5,200 lb axle. For a replacement you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles #8327816. However, this axle has a spring center measurement of 71-1/2" and it…

Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…

It does sound like your bearings are a #L44649 (1.063" inner diameter). If they are original to the trailer they may be pretty worn, which is why your measurements may be off by a few hundredths. Also the seal #34823 that can be used with the…

Hey Steven, you do have a unique setup but we do have the CE Smith 2,700 lb axle hub part #CE13109 that matches the bearing and seal dimensions you have/need. This has a 4 on 4 inch wheel bolt pattern but if you need 5 on 4-1/2 inch you'd instead…

The closest axle we have to what you need is the part #20440I-EZ-60 which has very similar specs as what you need, but the spring center is off by one inch as it is 48 inches on this axle. The overall capacity is 2,000 lbs and the hub face to hub…

We do not mount tires in house, so if you order just a trailer wheel like #DEX54FR and a trailer tire you'd get them separate ready for a local tire shop to get them mounted. To get them mounted from us you'd need to purchase a wheel and tire…

Hey Zoniezz, thanks for reaching out! That flat pieces with the 3 holes from the MORryde X-Factor Crossmember Adapter Kit #MR93WR are spacers, and they can be placed between the mounting brackets and the crossmember (see blue highlight in linked…

The Dutton-Lainson Roller Bunk #DL21741 that you referenced can be installed directly on top of your existing wooden bunks. According to the installation instructions when mounting over wooden bunks a 3/8 inch diameter lag screw is required. The…

Thanks for the picture! To be able to install the 5' Dutton-Lainson Boat Trailer Deluxe Roller Bunk #DL21741 on your trailer you can simply bolt them to your existing carpeted bunks due to you not having any center supports on your trailer. Keep…

Yes, the galvanized Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections part #DL21741 is what you are looking for. The rollers are constructed of 12-gauge, galvanized steel and have zinc-plated steel rollers hardware included. This…

The hidden crosstubes are definitely the way to go as they offer the best aesthetic for your 2021 Ford Edge, and between the Curt Trailer #C78KR, etrailer #e36RR, and Draw-Tite #75234, the best option is the latter: - Draw-Tite Max-Frame Trailer…

Hello again Stephen! The difference between the #IMF18741 and #IMF12811 is the S-hook. The #IMF18741 has vinyl coating on the hook to protect your boat while the other does not have this coating. I'm guessing you figured that out since I see you…