Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…
I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…
Hey Wayne! Our etrailer Sidewind Aluminum Trailer Jack w/ Wheel #e95YV would be a great option for your Karavan Classic trailer. I found online that the 17 ft 1997 Boston Whaler Montauk comes in at around 950 lbs, so the #e95YV's 1,500 lbs…
We currently will not have a kit that contains everything that you are looking for but we do have all the parts you will need. First I recommend upgrading your equalizers to the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR. These…
I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
Hello Morgan, Great question! The etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs #e78FV is going to be a great fit for your 2026 Ram 2500 whether it has a 6 1/2' bed (without Rambox) or an 8' bed. With the etrailer Over-The-Cab…
Hey Jeff, great question! Choose the 2,000 lb model if you tow larger travel trailers, enclosed trailers, dump trailers, equipment trailers, or other heavy-duty trailers with tongue weights that could exceed 1,000 lbs. It works for lighter trailers…
Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…
Hey Jerry! The TorkLift Tie-Downs like the #TL83DR you were looking at are a custom fit so you won't have to drill into your frame. These are the Talon, which is the upgraded aluminum version, and will fit your Ram assuming you have no running…
Hey Connor! Yes, the Curt Dual Ball Attachment for Weight Distribution Shanks #C69NR will work with an Equal-i-zer shank. This fits standard WDH shanks with 2-1/2" hole spacing. The #EQ90-02-4500 has 1-1/4" spacing, so every two holes is…
Hey David! The length of the tangs on the 2-Tang Clevis Attachment #BW54KR is 5.19". The distance between the tangs is 2" and the hole diameter is 1.11".
I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require…
Built for everyday use, a fixed step stays put for consistent footing and a low-profile setup. The serrated step surface offers good traction and pairs well with solid, heavy-duty construction for vans or campers. This combo keeps access simple and sturdy without moving parts to fuss with.
Often not directly. The underside typically isn't very flat; brackets and bolts sit under the step and the shank can run to the back edge. If you want to add a tube, plan on creative hardware like square U-bolts and brackets, and confirm you have clearance around the hitch and step supports.
They provide good traction. The serrated surface helps your boots bite so your footing feels secure getting in and out. For best results, keep the step clear of packed mud and ice, and check the edges for debris that could reduce grip.
Yes, a Fixed Serrated Step is a solid, heavy-duty option that holds up well on work and camper vans. Look for a low-profile design if you want it tucked in. If rear doors or a spare tire are close, check step depth and platform size so it ends where you want it and doesn't interfere.
Confirm your receiver size, like 2" or 2-1/2", and whether your hitch pin hole is 5/8" or 3/4". A locking hitch pin can help prevent theft. If the step uses position pins, make sure the pins are long enough to fully seat and the clips are in good shape before use.
2 Inch Hitch
2-1/2 Inch Hitch
Ball Mount Attachment
Hitch Step Parts or Accessories
Filters
