Drop Hitch - Draw-Tite

Hey Rob, I’d be wondering the same thing if I came across a ball mount made out of aluminum like the #BPH77MR while researching. Totally fair question. That said, I haven’t seen any noticeable difference in slop or wear compared to their steel…

Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…

Thanks for reaching out Mike! I spoke to Weigh Safe and only their Cerakote aluminum ball mounts are made in the USA. All other steel and aluminum ball mounts, including the steel 180 PRO models, are manufactured overseas. If you wanted an American…

Hey Tim, the Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera #BM86YR that you referenced does come with a camera in the third brake light/CHMSL location that you asked about. I attached a picture that shows the contents of the kit…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Michael! That restriction would be for a ball mount towing a trailer with tongue weight. It is different when you're flat towing your 2016 Chevrolet Equinox. You want to be within 3" of level so you can use the Roadmaster High-Low…

Hey James, the B&W Tow & Stow ball mounts also come in 3-ball configurations like #BW64FR and #BW49FR. These have the same 2" and 2-5/16" balls, in addition to a 1-7/8" ball. That way you can tow any trailer without hassle, and…

Hey Michael, The Brandmotion FullVUE Rear View Mirror #BM86YR is a confirmed fit for your 2025 Ram 3500. I reached out to the manufacturer as well just in case and they confirmed this is a direct fit for your vehicle and will work well! I went ahead…

Hey Dylan, normally fifth wheel hitches like the Curt A20 part #C86DV have the rails they install in resting basically directly on the truck bed frame. If your flat bed is only an inch taller than a standard bed that wouldn't be tall enough to…

Hey Michael, congrats on the new truck. The Ford puck systems haven't changed since they came out in the 2010-2011 model year trucks. The Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches item #C60629 you were…

Hey Rod, thanks for reaching out. Yes, it will! The Curt Helux Shock-Absorbing 5th Wheel Pin Box #C83RJ will indeed work with the Demco Autoslide 5th Wheel Hitch #DM8550038. Just make sure you also use the Demco Autoslide Locking Plate for Lippert…

Hi Brian, welcome back! The B&W Tow & Stow does have a few models specifically designed to work with the MultiPro tailgate so it won't hit the ball mount. To get a 1-7/8" ball you will need a tri-ball that also has the 2" and…