How To Put a 7-Way Plug In The Bed And On The Back Of A 2023 Ford F-350 Cab And Chassis

Updated 07/12/2023 | Published 07/11/2023

Products Featured in This Question

Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds - 10' Long

(85)

$143.95

Tow Ready 5th Wheel/Gooseneck Pigtail Wiring Harness with 7-Way, RV-Style Connector - 4' Long

(10)

$68.12

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

(6643)

$155.20

Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps

(127)

$19.27

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3397)

$121.19

Question:

Hi, I’m looking for two 7 way plugs for my 2023 Ford F350 cab and chassis with an aluminum flatbed. One for the gooseneck and one for the back of the bed. Thanks

asked by: Job T

Expert Reply:

I can definitely help and get you set up. If your truck does not have any factory trailer wiring we will basically have to do this from the ground up.

First you will install a 4 pin connector part # C58044. This will simply splice in using the included quick splice connectors.

Next you will need to install the universal 7 way install kit # ETBC7. This kit includes all of the components you will need to upgrade the existing 4 pin connector to a 7 way. You will also have everything needed to install an in-cab brake controller. If you want a great all around brake controller I recommend the Tekonsha prodigy P3 # 90195.

To get a 7 way plug in the bed also, I recommend using part # 20024. This is a universal 5th wheel/gooseneck pigtail and will splice into the rest of the wiring you already installed. You can use the included quick splice connectors to easily tie in.